Shopping Categories
    Filters
    Preferences
    Search

    20w Economic Desk Type Fiber Laser Marking Machine

    $14,538.00
    Cheap fiber laser marking machine for sale, faster marking speed, more sophisticated engraving effect, 20w output power, desktop type design, maintenance-free.
    SKU: ATOF20ED4
    Free shipping
    Delivery date: 6-12 days

    Fiber laser marking system features:

    • Desktop type is good for industrial factory.
    • Marks widest variety of materials, including steel, titanium, aluminum, copper, ceramics and some plastics.
    • 100,000+ hours of laser life, reducing costs and production downtime.
    • 110mm2 mark field (other sizes available).
    • No consumables and minimal maintenance help reduce operating costs.
    • Air-cooled 10W-20W models.
    • Higher beam quality than flash lamp, diode pumped and vanadate, resulting in a high quality mark.
    Basic Information
    Model ATOF20ED4
    Weight 154.32 lbs. (70 kg)
    Dimension 600mm x 750mm x 1430mm (23.62" x29.53"x56.30")
    Warranty 2 Years
    Distance (scanner to working plateform) 97~387mm (3.82" x 15.24")
    Platform size 300mm x 300mm (11.81" x 11.81")
    System Technical Specifications
    Laser type Fiber; Ytterbium doped
    Output power 10W, 20W
    Power requirements 10W 20W: 220 V AC, 16 A, 50/60 Hz
    Wavelength 1070 nm
    M2 <1.4
    Operation mode Pulsed
    Pulse rep rate 20-80 kHz
    Cooling 10-20W: Fan assisted air cooling
    Scanning method XY galvanometer
    Max line speed 7,000 mm/sec
    Controls LEC 1 industrial computer based controller
    Communications USB ports, Ethernet, EtherNet/IP™, RS232
    Documentation USB flashdrive with operator's manual and integration guide; Online video troubleshooting
    Lens Configurations
    Lens Marking field Focal length
    100mm 65mm x 65mm (2.5" x 2.5") 97mm (3.82")
    160mm 110mm x 110mm (4.3" x 4.3")  175mm (6.89")
    254mm 175mm x 175mm (6.9" x 6.9") 296mm (11.65")
    330mm 228.6mm x 228.6mm (9" x 9") 387mm (15.23")

    Material: Plastic, steel, stainless steel, magal, zinc alloy, copper, nickeling, zincing, alox.

    Tips: The methods of verifying the parameters of the fiber laser marking machine

    1. First of all, it is required to fetch the points of four corners on the baseplate of the marking head. Then, please employ a steel ruler o measure their straight intervals with the marking platform, thus making the data measured of the four test points to be thoroughly the same. If watching with naked eyes, the difference should be no more than 0.5mm. A leveling instrument can be firstly used to level the marking surface. Then the tightening marking head can be used to  hold the line of the four intervals.
    2. Employ the imitated light, such as the light of the red light indicating. Or perhaps it can directly open the laser to enable it to have connection model. Of course, the power should not be too big, so as to make the light to be able to stack output in the middle shaft position of the marking head well.
    3. Install the X and Y driving circuit plates. Please pay attention that the installation orientation must be convenient for wiring. Furthermore, the radiating silicone grease will be added to the aluminum base of the driving plate and the marking head.
    4. Install the X and Y motor. A slight fixation is enough. Please pay attention that the lens of the two motors could not be bumped. Furthermore, it is required to make sure that the vibration lens should not bump together at any swinging viewpoint.
    5. Supply power to the vibration lens. Before supplying power, please check if the positive and negative 24V and 0V of both the vibration lens plate and the power line are connected correctly.
    6. Regulate the approximate directions of X and Y vibration lens. Please make sure that the red light is presented on the marking platform.
    7. Regulate the height and viewpoint of the X vibration lens slightly. Since X vibration lens are used to control the horizontal direction, the red light must be in the middle of the vibration lens by rolling the direction slightly to point justly below the lens direction.
    8. Regulate the depth and viewpoint of the Y vibration lens slightly. Since X vibration lens are used to control the vertical direction, please roll the direction slightly to make the indicating light to be placed justly below the lens direction.
    9. After regulation, lock X and Y motors.
    Write your review for 20w Economic Desk Type Fiber Laser Marking Machine
    • Bad
    • Excellent