(0) Shopping cart
You have no items in your shopping cart.
Shopping Categories

    RS-232/ RS-485 to RS-485 Hub, 8 Ports

    Cost-effective RS-232/ RS-485 to RS-485 hub with 8 ports, 300-115.2Kbps baud rate, asynchronous half-duplex operating mode, terminal block connector, 5000m (9600bps) transmission distance. It is widely used in highway toll system, traffic monitoring system and power system.
    SKU: ATO-UT-1208
    Free Shipping Worldwide
    Delivery date: 6-12 days

    Cheap Cost-effective RS-232/ RS-485 to RS-485 hub with 8 ports, -40℃ to 85℃ operating temperature, RS-232C & RS-485 input interface.


    Model UT-1208
    Standards RS-232/485 EIA/ TIA
    Input interface RS-232C & RS-485
    Output interface 8 ports RS-485
    Baud rate 300-115.2Kbps
    Transmission distance 5000m (9600bps)
    Operating mode Asynchronous half-duplex
    Connector Terminal block
    Dimension 210mm*130mm*32mm
    Operating temperature -40℃ to 85℃
    Relative humidity 5% to 95%
    Certificates RoHS, CE, FC
    Warranty 12 months

    Dimension (mm/ inch)

    Dimension of RS232 to RS485 hub of 8 ports

    Tips: The Classification of Hub?
    HUB can be divided into passive HUB, active HUB, smart HUB and other HUB according to the way of processing the input signal.
    Passive HUB:
    It is the worst type, does not do any processing to the signal, does not extend the transmission distance of the medium, and has a certain impact on the signal. Each computer connected to this HUB can receive signals from all other computers on the same HUB.
    Active HUB:
    The difference between an active HUB and a passive HUB is that it can amplify or regenerate the signal, so that it extends the effective transmission distance between the two hosts.
    Smart HUB:
    As soon as I heard this word, I knew that this guy must be better than those two! In addition to all the functions of an active HUB, the intelligent HUB also has network management and routing functions. In the smart HUB network, not every machine can receive the signal, only the computer with the same address as the signal destination address can receive it. Some smart HUBs can choose the best path by themselves, which has a good management of the network!

    Write your review for RS-232/ RS-485 to RS-485 Hub, 8 Ports
    • Only registered users can write reviews
    • Bad
    • Excellent