ATO high pressure regenerative blowers have dual functions, one machine for two purposes, which can be used for suction or blowing. Compared with centrifugal fans and medium pressure blowers, ATO regenerative blowers' pressure is much higher, even more than ten times that of centrifugal fans. Since our regenerative blower runs without oil, the output air is clean. If you use anti-vibration mounting feet, ATO high pressure regenerative blower has very low requirements for the installation foundation. It can even run normally without fixing the feet, which is very convenient and saves installation costs and installation cycles. Now we have 1 phase 220V regenerative blowers and 3 phase 380V regenerative blowers for sale online and multiple motor power options are offered: 1/ 2 hp (400W), 1.1 hp (850W), 2 hp (1.6kW), 3 hp (2.2kW). They can also meet your demand for airflow volume from 47 cfm to 124 cfm. Compared with similar blowers, the high pressure regenerative blowers for sale on ATO have lower operating noise and a very long service life. As long as they are in normal use conditions, they will be used for 3 to 5 years without any problems. You can buy a suitable regenerative blower according to your actual situation, and we will provide you with the most cost-effective price.
2.7A 220V high pressure regenerative blower has the air flow capacity of 80 m³/ h (47 cfm), compress pressure of 130 mbar, vacuum pressure of -120 mbar. It is 53 dB low noise vortex blower that powered by 400W (1/ 2 hp) motor.
Buy good price 220V high pressure regenerative blower from ATO. The motor works at single phase, 0.7 hp (550W) power and the air output volume up to 56 cfm. -120 mbar rated vacuum pressure, 130 mbar rated compress pressure. The front bearing design increases the working stability.
ATO 1 hp (750W) high pressure air blower has competitive price. It is single phase blower with 145 m³/ h (85 cfm) maximum airflow capacity, -160 mbar rated vacuum pressure, 160 mbar rated compress pressure. The chassis is made of high-quality aluminum alloy by one-time die-casting, attractive and durable.
Lower cost regenerative blower is configured with a 380V motor and the power output is 400W (1/ 2 hp). It has the air flow capacity of 80m³ per hour (47 cfm). Rated vacuum pressure is -120 mbar, rated compress pressure is 130 mbar.
Three-phase 0.7 hp (550W) high pressure blower for sale online. △220-240V / Y345-415V voltage, 2.8△ A / 1.6Y A current, 50 Hz frequency. It has the advantages of large air flow of 100 m³/ h (59 cfm), -110 mbar rated vacuum pressure and 120 mbar rated compress pressure.
Oil-free design high pressure regenerative blower runs with three-phase 1 hp motor, the air exhaust is cleaner. It has the capacity of 145 m³/ h (85 cfm) maximum airflow, -160 rated vacuum pressure, 160 mbar rated compress pressure. Buffer airflow can reduce noise and shock.
ATO best sale three-phase regenerative blower has high-power and large airflow, which are 2 hp and 124 cfm respectively. 380V power supply, -200 mbar rated vacuum pressure, 190 mbar rated compress pressure. High pressure, built-in protection, good heat dissipation performance, not easy to burn.
The affordable price 380 volt regenerative blower is a high pressure industrial air blower with large airflow up to 124 cfm. It works at three phase, 3 hp working power, -220 mbar rated vacuum pressure, 270 mbar rated compress pressure.