(0) Shopping cart
You have no items in your shopping cart.
Shopping Categories

    Rebar Tool

    View as Grid List
    Display per page
    Sort by

    1" (4-25mm) Electric Rebar Bender, 950W/1300W

    SKU: ATO-RB-1
    4 - 25mm rebar bender tool is a portable bending machine, with bending rebar range 1 inch, ending angle 0~130°, optional no-load power 1300W or 950W, and bending speed 2.5~3s. Electric rebar bender is driven by 220V/110V AC hydraulic, used for round steel, rebar, screw rod, etc.

    1" (4-25mm) Electric Rebar Cutter, 1300W/1440W

    SKU: ATO-RC-1
    Buy am high effiency electric rebar cutter at low cost. It is the best way to cut steel bars such as rebar, round bar, steel rod, iron rod, screw, etc. 1" portable hydraulic rebar cutter is operated by a hydraulic system and motor, equipped with a Ф4 - Ф25mm cutting range, 220V/110V voltage, 1300W/1400W no-load power, and 4.5s cutting speed.

    14.4V Automatic Rebar Tying Machine, 4~28/45/58mm

    SKU: ATO-RTM-144
    Portable tier machine is used for automatic rebar tying. It is equipped with a 14.4V battery, rebar binding range in construction work is 4-28/45/58mm. Automatic rebar tying tool can tie 3500 knots per charge, suitable for steel bar, floor pipe, heating floor mesh, etc.

    18.5V Automatic Rebar Tying Machine, 4~58mm

    SKU: ATO-RTM-185
    Rebar tying machine is an automatic machine with a built-in micro-controller circuit board and an 18.5-volt battery, suitable for 4-58mm/8-45mm/8-58mm diameter rebar, widely used in construction engineering to replace manual rebar binding.

    3/4" (4-20mm) Electric Rebar Bender, 900W/1050W

    SKU: ATO-RB-34
    The provided electric rebar bender is a portable electric bending tool driven by the hydraulic system. 4-20mm (3/4 inch) rebar bending machine features bending angle 0~130°, rated power 900W/1050W and bending speed 5s, ideal for low/medium carbon steel, round steel and rebar.

    5/8" (4-16mm) Electric Rebar Bender, 800W/900W

    SKU: ATO-RB-58
    Low-price electric rebar bender for sale, available with bending range Ф4-Ф16mm (5/8 inch), bending angle 0~130°, no-load power 800W or 900W, and bending speed 5s. Rebar bending tool is suitable for steel bars, round bars, iron rods, carbon steel, etc.

    7/8" (4-22mm) Electric Rebar Bender, 950W/1300W

    SKU: ATO-RB-78
    Factory price electric rebar bender, diameter 4-22mm (7/8 inch), bending angle 0~130°, driven by 220V/110V AC hydraulic, bending speed 2.5~3s. 950W/1300W rebar bender tool is suitable for medium and low carbon steel, round steel, and rebar.

    9.6V Automatic Rebar Tying Machine, 4~28/45/58mm

    SKU: ATO-RTM-96
    Low price rebar tying machine for sale. It comes with a binding reinforcement range 4-28mm/45mm/58mm, powered by a 9V NI-MH battery, number of knots per charge up to 1400 knots. High-efficiency automatic rebar-tying tool could drastically lower the work strength and save manpower.

    3/4" (4-20mm) Electric Rebar Cutter, 900W/1250W

    SKU: ATO-RC-34
    900W/1250W electric rebar cutter is designed for cutting steel bar, round bar, square steel, iron rod, carbon steel, etc. Portable rebar cutter machine features a cutting range Ф4-Ф20mm (3/4"), cutting speed 3s~3.5s and optional voltage 110V/220V, high cutting efficiency, accuracy and safety.

    5/8" (4-16mm) Cordless Rebar Cutter, 140W

    SKU: ATO-CRC-58
    Cordless rebar cutter for sale online. Cutting range Ф4-Ф16mm (5/8-inch), lithium battery voltage 18V, no load power 140W and cutting speed 4.0s~5.0s, rechargeable electric rebar cutter is ideal for cutting steel bar, round bar, carbon steel, square steel and iron rod.

    5/8" (4-16mm) Electric Rebar Cutter, 800W/950W

    SKU: ATO-RC-58
    Portable rebar cutting machine is driven by a hydraulic system and high power motor. Electric rebar cutter comes with a cutting range Ф4-Ф16mm (5/8 inch), no-load power 800W/950W, cutting speed 2.5s~3s, 100V or 220V voltage, suitable for steel bar, round bar, iron rod, carbon steel, high cutting efficiency, accuracy and safety.

    7/8" (4-22mm) Electric Rebar Cutter, 950W/1250W

    SKU: ATO-RC-78
    Low price electric rebar cutter for sale. It is a hydraulic rebar cutter that can quickly and efficiently cut steel bars, steel pipes and house anti-theft windows. Ф4-Ф22mm (7/8-inch) cutting range, 220V/110V voltage, 950W/1250W no-load power, and 3.5s~4.5s cutting speed are provided.