2" CPVC True Union Ball Valve

Note: This ball valve cannot be used for drinking water.

Buy low price CPVC true union ball valves online with DN50 bore size and 60mm outer diameter. The double union ball valve is the perfect choice for customers who require a reliable, easy to maintain valve that can withstand harsh operating conditions.

Specification

• Model: ATO-PBV-DN50
• Material: CPVC
• Inner Diameter: 2 inch (DN50)
• Outer Diameter: 60mm
• Direction of Flow: bi-directional
• Type (Channel Position): Two-way
• Pressure Environment: High pressure
• Operating Temperature: -10-60°C

Features

• 2 inch CPVC true union ball valves are highly resistant to corrosion from chemicals, making them ideal for use in corrosive environments.
• These true union CPVC ball valves are designed for easy installation and maintenance, which helps reduce downtime and maintenance costs.
• The full bore design of the CPVC ball valve allows for high flow rates and minimal pressure drop, which ensures efficient operation of the system.
• The true union design of the valve ensures that it is completely leak-proof, even under high pressure.
• The ball valve design allows for easy and precise control of the flow of fluid in the system.
• CPVC double union ball valves can be used in a wide range of applications, including chemical processing, water treatment, and irrigation systems.
• 60mm CPVC true union ball valves are made from high-quality materials that are resistant to wear and tear, ensuring a long service life.

Dimension (Unit mm)

Applications

CPVC ball valves are commonly used in a variety of industries, including water treatment, irrigation, chemical processing, and HVAC systems. They are particularly useful for controlling the flow of fluids or gases in pipelines and can be found in both commercial and residential applications. CPVC ball valves are also often used in aquariums and other aquatic environments to regulate water flow and prevent backflow.

Tips: How to install a CPVC ball valve?

Installing a CPVC ball valve is a relatively simple process that can be done with a few basic tools. Here are the steps to install a CPVC ball valve:

1. Turn off the water supply to the area where you will be installing the ball valve.
2. Cut the CPVC pipe at the point where you want to install the valve. Use a CPVC cutter or hacksaw to make a clean, straight cut.
3. Use sandpaper to smooth the edges of the cut pipe. This will ensure a tight, leak-free seal.
4. Take the CPVC ball valve and remove any protective caps or covers from the ends.
5. Apply CPVC primer to the outside of the pipe and the inside of the valve sockets. Allow the primer to dry for a few seconds.
6. Apply CPVC cement to the primed areas. Make sure to apply enough cement to create a good seal.
7. Push the valve onto the pipe and hold it in place for a few seconds to allow the cement to dry.
8. Repeat steps 5-7 for the other end of the valve.
9. Turn the water supply back on and check for leaks.
10. If there are no leaks, you have successfully installed the CPVC ball valve.

Note: Always follow the manufacturer's instructions when installing CPVC ball valves, and wear appropriate safety gear, such as gloves and eye protection, during the installation process.