(0) Shopping cart
You have no items in your shopping cart.
Shopping Categories

    1.5 kW CNC ATC Spindle, 60000 rpm

    5 out of 5 based on 3 reviews | Write a review
    Buy a 3 phase 1500W water-cooled automatic tool changer spindle motor from reliable ATC spindle manufacturers, works at 220V AC, 0.28 Nm torque, Φ3- Φ6 collet, high speed 60000rpm, and frequency up to 1000Hz, high precision & long life, enhances several times efficiency, perfect for CNC router machines.
    30-day Returns
    Free Shipping
    Delivery date: 6-12 days

    Low cost 1.5 kW water cooled ATC spindle motor, 60000 rpm speed, 0.28 Nm torque, Φ3- Φ6 collet, 1000Hz frequency, 3 phase 220V AC rated voltage, widely used in CNC drilling and milling equipment.


    • Reasonable structure design, simple and compact configuration, easy to take apart.
    • High precision, inflexibility and efficiency, long operation life.
    • With high grade size, shape, position precision, and quality of the surface.
    • Enough abrasive resistance, vibration resistance, suitable size.
    • Work stable, low noise, enough fatigue strength.


    Model ATO-DC-62F
    Motor power 1500 W
    Rated voltage 200V AC
    Phase Three phase
    Max speed 60000 rpm
    Max current 10 A
    Max frequency 1000 Hz
    Torque 0.28 N·M
    Cone at the end of the shaft pulsates ≤0.001 mm
    Tooling releasing air pressure 5.6-6.0 Kgf/cm²
    Tooling change method Automatic tool changer
    Tooling pulling force ≥1200 N
    Tooling back air pressure No
    Tooling connection Φ3- Φ6 collet
    Cooling Water cooling
    Encoder No
    Coolant pressure ≥2.5 Kgf/cm²
    Approach switch No
    Bearing lubrication method Grease
    Balance level G1
    Install method Clamp
    Vibration Value ≤0.8 mm/s
    Weight 3.9 Kg

    Note: The spindle motor and VFD shall be suitable with each other. The specifications and parameter settings of the VFD shall match the nominal parameters of the spindle motor. Otherwise, it will burn the spindle motor if the settings are not correct.

    Dimension (Unit: mm)

    1500W ATC Spindle Dimension


    1500W CNC ATC Spindle Details

    Tips: Working Principle of the ATC Spindle

    The rear part of the main shaft is a cylinder structure. The inside of the cylinder uses air pressure to push the thimble against the middle rod to extend the chuck so that the tool falls off, and then the equipment can use the shaft platform to automatically grab the tool. The solenoid valve at the back of the spindle is used to release the air pressure to clamp the tool. This process is called automatic tool change, or ATC for short.

    Existing reviews of 1.5 kW CNC ATC Spindle, 60000 rpm
    This ATC spindle is well made.
    I bought a 1.5kw CNC spindle for a work project. So far it has been working fine, I have no complaints with the motors at all. Quite a bit quiet than the last one I had, strongly recommend to the people who need a ATC spinle.
    From: zyc | Date: 17/05/2022
    Was this review helpful? Yes No (0/0)
    Very nice spindle
    The ATC spindle arrived quicker than expected, and the experience with this product is great. Thanks to the seller for helping it get it up and running properly, great customer service, I'm very satisfied.
    From: Pearl | Date: 22/04/2022
    Was this review helpful? Yes No (0/0)
    Very quiet and improved dust control.
    My spindle arrived on time, with very good protective packaging, and the simple instruction sheet was helpful. My spindle works well, is very quiet, and with no motor cooling fan forcing air through the spindle and onto the work piece to contend with, dust control, with my dust shroud, is greatly improved. I use it on a hobbyist CNC machine that I have. I’m very happy with it.
    From: cxk | Date: 20/04/2022
    Was this review helpful? Yes No (0/0)
    Load more reviews...
    Write your review for 1.5 kW CNC ATC Spindle, 60000 rpm
    • Only registered users can write reviews
    • Bad
    • Excellent