High quality three phase vibration motor, 6 pole, 1500W (2 hp), IP65, insulation class F, vibration motor is used as a material flow aid in the process of screening, conveying, cleaning, separating, compacting and sorting.
Specification
1500W Three Phase Vibration Motor Dimension (unit: mm)
3 Phase AC Vibration Motor StructureTips: How to maintain and repair the vibration motor?1. Keep the vibration motor clean and check whether the grounding device of the vibration motor is reliable.2. Check the reliability of the vibration motor drive mechanism.3. Check whether the ventilation of the vibration motor and the lubrication of the bearings are normal.4. Pull the shaft of the vibrating motor to check whether the rotor can rotate freely and whether there is noise during rotation.5. Check whether the brush assembly of the vibration dqmotor and the brush lifting mechanism are flexible, and whether the position of the brush lifting handle is correct.6. Check whether there are any cracks on the appearance of the vibration motor, whether the fastening screws and parts are complete, and whether the fixing condition you are concerned about is good.
This video will show you how to use vibration motor.
VFD Two-Wire Control Wiring with Push Button for Forward Motor
In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.