30kVA Single Phase 120v 60Hz to 240v 50Hz Converter

5 out of 5 based on 9 reviews | Write a review

$8,759.13

30 kVA pure sine wave AC power frequency converter, single phase 110V/120V/220V/230V/240V input, single phase 0V to 300V output, convert 50Hz power to 60Hz for household appliances, 400Hz for aircraft.

Input Voltage (Single Phase) *

Output Frequency *

50Hz/60Hz
400Hz [+$299.00]

SKU: HZ-50-1130

Qty:

30-day Returns

Delivery date: 6-12 days

Overview
Related Video

30 kVA single phase frequency converter, make your appliances compatible with international power systems, change single phase 240V 50Hz to 120V 60Hz (vice versa) in one step by inner step up & step down transformer.

Specification:

Model	HZ-50-1130
Capacity	30 kVA
Dimension	7705801140mm
Weight	270 kg
Input	Voltage	1 Phase 2 Wire: 110V, 120V, 220V, 230V, 240V ± 10% (Option *)
Input	Frequency	50 Hz, 60 Hz or 400 Hz ± 5%
Output	Voltage, current	110V Setting (Low grade): 0-150V, 250A
	Voltage, current	220V Setting 0-300V (High grade): 0-300V, 125A
	Load stabilization Rate	≤±1%
	Frequency	50Hz, 60Hz up to 400Hz adjustable Note: -When the output is 400Hz, the load capacity can only reach 50% of the rated capacity. -When the output is ≤120Hz, the load capacity can reach 100% of the rated value. -You can just adjust converter output frequency in the range (40-400Hz) for 400Hz option.
	Frequency Stability	≤±0.01%
	Harmonic Distortion	Pure Sine Wave ≤2%
	Frequency meter	4 digit, digital frequency meter, resolution 0.1Hz/Step
	Voltmeter	4 digit, digital voltage meter, resolution 0.1V
	Ammeter	4 digit, digital ammeter, resolution 0.1A
	Watt meter	4 digit, digital Watt meter, resolution 0.1W
Protection	With overload, short circuit, over temperature
Protection	Instantaneous power failure protection and alarm device
Working Environment	Temperature	0 - 40 deg.℃
Working Environment	Humidity	0 - 90% (Non condensation)
Warranty	18 months

Tips: Maintenance method of the frequency converter

Ensure correct voltage control, conduct sequence protective action test.
Pay attention to clean thoroughly the dust in the cooling air duct and air filter.
Ensure that the balance of the output voltage during the separate operation of the frequency converter meets the standard.
Guarantee the protection and display loop of the frequency converter to have no abnormal condition.
Conduct one regular inspection of the frequency converter equipment every year.
Inspect if there is any loose screw spike, plugin and other equipment components.
Measure the waveform of the driving circuit to check if there is any distortion, if the UVW phase waveform is the sine wave.
If it is allowed, the oscilloscope can be used to measure the stability of the switching power supply output voltage.
It is required to wipe the conductor and insulator with alcohol in time, so as to ensure the cleaning degree.

MOS Tube Testing in a Frequency Converter

In this video, we first show you the internal structure of our frequency converter, so that you know the exact location of the MOS tube in the converter, and then we use a multimeter to test these tubes in diode mode and ohm range respectively. In the process, we also explain to you how to judge the condition of the equipment.

Frequency Converter Troubleshooting: CBB65 Capacitor Testing

This video will walk you through the steps of how to test the CBB65 capacitor in a frequency converter using a multimeter.

Frequency Converter Driver Board Test

This is one of the ATO single-phase frequency converter repair tutorial series. In this video, we show you how to simply test the driver board in the variable frequency power supply using a multimeter.

Pre-maintenance preparation of frequency converters

In this presentation, we show you the maintenance preparation procedure for an ATO single-phase frequency converter (cabinet version), specifically, involving the disconnection of the internal bridge rectifier.

Cabinet Frequency Converter Wiring and Testing

This video gives a rundown of how to wire and test a 1 single cabinet frequency converter using a multimeter. ATO provides a wide range of high quality single and three phase frequency converter available in rack-mounting and cabinet styles. Rated capacity ranges from 500VA/1kVA/2kVA to 200kVA. In addition to the typical frequency conversion between 50Hz and 60Hz, our converters also provide the maximum output frquency of 400Hz, tailored to various industrial application requirements.

Frequency Converter 60Hz to 50Hz Operation Demo

This video is a brief demo of on-site operation of ATO 1-phase frequency converters that are able to convert 110V 60Hz to 230V 50Hz or vice versa. Besides, we also provide versions of 120V 60Hz to 220v 50Hz, 220V 50Hz to 110V 60Hz, 240V 50Hz to 120V 60Hz for option.

Existing reviews of 30kVA Single Phase 120v 60Hz to 240v 50Hz Converter

One frequency converter is no longer functioning

We purchased 3 30 kVA frequency converters about 4 months ago. One of them is no longer functioning and we need to get it resolved.

From: Barrel | Date: 11/08/2022