(0) Shopping cart
You have no items in your shopping cart.
Shopping Categories

    Beam Load Cell, 10kg/20kg/30kg/50kg/100kg/200kg/500kg to 1000kg

    5 out of 5 based on 2 reviews | Write a review
    Beam load cell can bear both tension and pressure. It is a cantilever beam load cell with bellows. Beam load cell has good anti-eccentric load and anti-fatigue performance, with low height, all sealed structure and protection class IP68. Multi cantilever beam load cells are suited to use for static and dynamic weighing system, such as variable belt scale, hopper scale, flatform weighing scale, material testing machine and other force measurement and process control.
    SKU: ATO-LC-B01
    Free Shipping Worldwide
    Delivery date: 6-12 days

    Beam load cells have capacity range from 10kg, 20kg, 30kg, 50kg, 100kg, 200kg, 300kg, 500kg to 1000kg. Load cell capacity can be customized according to customer requirements.
    After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.


    Model ATO-S-LCB-DYBW-106
    Weight 0.5~1.5kg
    Capacity range * 10kg~1000kg
    Accuracy 0.03%F.S (linearity + hysteresis + repeatability)
    Sensitivity 2.0±0.05mV/V
    Creep ±0.03%F.S/30min
    Zero output ±1%F.S
    Temperature effect on zero ±0.02%F.S/10℃
    Temperature effect on output ±0.02%F.S/10℃
    Operating temperature -40℃~+80℃
    Input impedance 352±10Ω
    Output impedance 350±5Ω
    Insulation resistance ≥5000MΩ
    Safety overload 150%F.S
    Overload limit 200%F.S
    Bridge voltage (excitation voltage) DC 5-10V
    Material Alloy steel (filled with inert gas)
    Protection class IP68
    Cable length 2m
    Wiring EXC+: Red, EXC-: Black, SIG+: Green, SIG-: White


    Capacity Dimension (mm)
    A B C D E F G H Φ Φ1 Φ2 Φ3 Φ4
    10~200kg 123 13 18 82 45 59 22 20 45 8.5 27 32 11
    300~1000kg 210 15 40 133 93 64 34 25 60 13 35 50 14

    Beam load cell 10kg to 1000kg dimesional drawing
    Tips: Beam load cell with bellows vs single point load cell

    1. Structure: Both of them are beam load cells. The difference is that the beam load cell with bellows is a cantilever beam structure and the single point load cell is a parallel beam structure.
    2. Application: Using for the platform scale or hopper scale, beam load cells with bellows are used to combine into a group of four or three units. Single point load cell generally uses only one in the middle of a pricing scale or a human scale. The single point load cell is calibrated for angular differences before leaving the factory.
    3. Operating environment: The beam load cell with bellows can be used for both static and dynamic weighing, and the unique bellows seal allows it to be used in very harsh weighing environments. The single point load cell can only be used for static weighing and should be away from harsh environment. But its impact resistance and stability are good.

    In this video, ATO will show you how to wire a strain gauge load cell with a display controller.

    Existing reviews of Beam Load Cell, 10kg/20kg/30kg/50kg/100kg/200kg/500kg to 1000kg
    Beam load cell can be connected to GPS tracking device
    Can your load cell be connected to GPS tracking device?
    From: Nivekt | Date: 08/04/2021
    Was this review helpful? Yes No (0/0)
    ATO Responded
    Load cell cannot be integrated/connected to GPS tracking device, but as described, you can connect to transmitter or digital control display.
    Use of load cell
    Are your load cells usable with load cell amps from other companies? Is your transmitter usable with load cells from other companies?
    From: Loretta | Date: 10/10/2021
    Was this review helpful? Yes No (0/0)
    ATO Responded
    Yes, our transmitter can be used with other weighing transducers (output 0-20mV).
    Write your review for Beam Load Cell, 10kg/20kg/30kg/50kg/100kg/200kg/500kg to 1000kg
    • Only registered users can write reviews
    • Bad
    • Excellent
    Customers who bought this item also bought

    Load Cell Transmitter, Output 0-5V/0-10V/4-20mA/0-20mA

    Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA/0-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.