(0) Shopping cart
You have no items in your shopping cart.
Shopping Categories

    Programmable Temperature Controller, ON-OFF/PID Control

    5 out of 5 based on 1 reviews | Write a review
    Programmable temperature controller has dual digital 4 LED display, on-off control/PID control, support universal inputs (Cu50/Pt100/K/E/J/T/S/R, 4-20mA, etc.), 4 kinds of output mode for select (relay output/SSR output/SCR/transmitter output 4-20mA), additional output RS485/232 communication output, total 64 custom program segments for subsection control.
    Free Shipping Worldwide
    Delivery date: 6-12 days

    PID temperature controller can support not only temperature sensors, but also various sensors, such as pressure sensors, load cells, displacement sensors, liquid level sensors, gas sensors, humidity sensors, and other non-standard sensors.


    Model ATO-TCPD2
    Weight 0.5kg
    Dimension (Length*High*Depth) * D1: 160*80*80mm with hole size 152*76mm; D2: 96*96*110mm with hole size 92*92mm; D3: 48*96*110mm with hole size 44*92mm; D4: 96*48*110mm with hole size 92*44mm; D5: 72*72*110mm with hole size 68*68mm; D6: 48*48*110mm with hole size 44*44mm; D7: Rail type 72*88*59mm
    Supply voltage AC/DC 85V-240V, 50-60Hz
    Working environment Temperature: -10~60℃, humidity: ≤90%RH
    Sampling period 8 times/second; When set digital filter parameter FILt=0, response time≤0.5s
    Accuracy ±0.5%F.S ±1 digit
    Resolution ≤0.01℃
    Input signal * I1. Temperature sensor: CU50 (-50.0~150.0℃), PT100 (-199.9~600.0℃), K (-50.0~1300℃), E (-50.0~700.0℃), J (-30.0~900.0℃), T (-199.9~400.0℃), S (-30.0~1600℃), R (-30.0~1700℃), WR25 (-30.0~2300℃), N (-30.0~1200.0℃)
    I2. Analog signal: 4-20mA, 0-10mA, 0-5V, 1-5V, 0-50mV, 10-50mV
    Control mode 1. On-off control; 2. PID control
    Need manually switch to another control mode.
    Output mode * O1: Relay output; O2: SSR output; O3: SCR output; O4: Transmitter output 4-20mA/0-10V
    Alarm mode * A1 Default mode: 1 alarm output; A2 Extension mode: 2 alarm outputs
    Alarm Upper limit, lower limit, upper deviation, lower deviation, in the deviation section, outside the deviation section
    Programmable function Subsection control, total 64 custom program segments (include 32 constant temperature segments and 32 warming segments)
    Program segments modes 1. Execution mode: Standby after execution; Skip to the first segment after execution and continue execution (loop execution).
    2. Power-up mode: The current segment is automatically executed after power-up; The first segment is automatically executed after power-up; Waiting for user command after power-up.
    3. Constant temperature segment time unit: minimum unit is minute; minimum unit is second.
    4. The bottom window can be manually switched to display: The set value of current segment; The number of current segment; The running time of current segment.
    5. Custom output alarm time after last segment finished (optional).
    Additional power supply * DC 24V for sensor of input signal I2
    Additional output mode * RS: RS485/232 communication (MODBUS-RTU protocol); TS: 4-20mA/1-5V, 0-10mA/0-5V transmitter

    Programmable temperature controller wiring diagram:
    Programmable temperature controller wiring diagram
    Tips: What is ON/OFF control in temperature controller?
    In temperature controller, ON/OFF control is setting parameter P to 0. Temperature controller compares the difference value between the measured value (PV) and the set value (SV), and regulates controlled plant by ON/OFF control. When the temperature is lower than the setting lower limit parameter, temperature will open the heating device and the device runs at full power. When the temperature is higher than the setting upper limit parameter, temperature controller will close the heating device and the heating is completely stopped. The temperature fluctuates slowly between the lower limit and the upper limit. There is fluctuation for ON/OFF control temperature. The equipment starts and stops frequently, but the control method is simple.
    ON/OFF control is suitable for the environment that has lower requirement for control accuracy, such as water temperature control of baths.

    1. How to use a dual channel temperature controller to measure temperature and humidity?
    Want to know how to measure temperature and humidity? In this video, ATO will show you how to use dual channel temperatue controller, RTD Pt100 sensor, humidity sensor, SSR and other devices to monitor temperature and humidity at the same time.

    2. How to use the RS485 communication function of temperature controller for temperature and humidity remote monitoring?
    ATO temperature controller with RS485/RS232 output has the special software for temperature and humidity remote monitoring. After purchasing one temperature controller, you can receive an installation program. The operations are shown in the video below.

    Existing reviews of Programmable Temperature Controller, ON-OFF/PID Control
    Good quality for the price
    I use it for controlling a fan to keep my duck coop cool. These work superbly and have the current-carrying capacity to handle them. Excellent PID control with long enough leads I can place them at a good distance. I would like to get and extension cable for better sensor placement. Simple operate, but directions are difficult to understand. You’ll figure them out in the end.
    From: Sarah | Date: 15/07/2021
    Was this review helpful? Yes No (0/0)
    Write your review for Programmable Temperature Controller, ON-OFF/PID Control
    • Only registered users can write reviews
    • Bad
    • Excellent