1.5 hp (1100W) Submersible/Deep Water Well Pump, 110VDC

Lower cost water well pump for sale, with 80cm/ 60cm length for selection, brushless DC motor internal motor. The deep well water pump with a special DC controller which can show power, voltage, current and speed values in real time.

Well Pump Features

Controller Features

Package included

• 1 * Water well pump with 2m cable
• 1 * DC controller
• 1 * Stainless steel float switch (water level sensor for the tank)
• 1 * Pump outlet joint connector
• 1 * Splice kit for cable join
• 1 * Splice kit for waterproof
• 1 * User manual

1100W 110V DC water well pump performance curves:

Max. Flow: 3.8m³/h, Max. Head: 123m, Model: 3DPC3.8-123-110-1100

Max. Flow: 4.8m³/h, Max. Head: 110m, Model: 3DSC4.8-110-110-1100

Max. Flow: 6.0m³/h, Max. Head: 84m, Model: 4DPC6-84-110-1100

Max. Flow: 5.0m³/h, Max. Head: 101m, Model: 4DSC5-101-110-1100

Tips: Precautions for Water Well Pump.

1. Pay attention to maintenance after the water pump is used. For example, when the water pump is used up, the water in the water pump should be cleaned. It is best to remove the water pipe and rinse it with clean water.
2. The tape on the water pump should also be removed, then rinsed with water and dried in the light. Do not put the tape in a dark and humid place. The tape of the water pump must not be stained with oil, let alone some sticky things on the tape.
3. Carefully check whether there are cracks on the impeller, and whether the impeller is loose on the bearing. If there are cracks and looseness, it should be repaired in time. If there is dirt on the pump impeller, it should be cleaned up.