2 kW power rating high torque servo motor, brushless design, with 220V AC supply voltage, 2500 rpm, max speed up to 2800 rpm. It is available in flange sizes of 130mm square flange size, IP65 for body, manufacturer direct sale.
2 kW Servo Motor Specification
Basics |
Model |
ATO130SY-M07725 |
Matched Drive Model |
ATO-SG-AS302600 |
Weight |
8.5 Kg |
Rated Power |
2000 W |
Rated Voltage |
Three phase 220V AC |
Rated Current |
7.5 A |
Rated Speed |
2500 rpm |
Max Speed |
2800 rpm |
Rated Torque |
7.7 N.m |
Peak Torque |
22 N.m |
Rotor Inertia |
1.53x10-3 KG.m2 |
Technical Parameters |
Number of Pole Pairs |
4 |
Incremental Encoder Line |
2500/5000 PPR |
Absolute Encoder |
17/33 bit, 22/38 bit, 23/39 bit |
Structure |
Plastic packaging, self-cooling |
Vibration |
Under 2.5G |
Work System |
Continuous |
Installation Method |
Flange installation |
Insulation Class |
Class B |
Insulation and Voltage Resistance |
1500V AC, 1 Min |
Insulation Resistance |
500V DC, 10Ω above |
Safety Class |
IP65 |
Warranty |
12 months |
Environment |
Temperature |
0℃ ~ +55℃ |
Altitude |
Under 1000m |
Humidity |
<90%RH, (no dewing) |
Installation Dimension (unit=mm)
Servo Motor without Brake Dimension

L (Incremental/Absolute encoder): 195 mm
Servo Motor with Brake Dimension

L1 (with brake): 245 mm
Note:
*All above is the standard installation dimension, can be changed according to the customers' requirments.
*Not hit the shaft, or the encoder in the other end would be damaged.
Winding Connection Table
Winding Wire |
U |
V |
W |
PE |
Braking Wiring |
Brake |
Brake |
Socket Number |
2 |
3 |
4 |
1 |
Socket Number |
1 |
2 |
Brake Voltage |
24V DC |
The Encoder Connection Table
Signal Definitions |
5V |
0V |
A+ |
B+ |
Z+ |
A- |
B- |
Z- |
U+ |
V+ |
W+ |
U- |
V- |
W- |
PE |
Socket Number |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
1 |
Absolute Signal Definitions |
PE |
GND |
VB |
SD- |
GND 0V |
SD |
Vcc 5V |
Socket Number |
1 |
2 |
3 |
4 |
5 |
6 |
7
|
Tips: Allowable shaft terminal load for servo motor
- Ensure that radial and axial load applied on servo motor shaft during installation and running is controlled within the specific value of every model.
- Take special care when installing the rigid coupling, especially note that excessive bending may cause damage or wear to shaft terminal and bearing.
- It is better to use flexible coupling, so as to make the radial load lower than allowable value. This element is specially designed for servo motor with high mechanical strength.