3 HP (2.2 kW) Magnetic Drive Pump

5 out of 5 based on 2 reviews | Write a review

$3,073.57

3 hp magnetic drive water pump with ETFE wetted-end material and FKM O-ring material for sale. Magnetic drive centrifugal pump availble in flange connections. Mag drive pump able to handle many types of chemical and temperature up to 90 ℃. Magnetic drive pump is widely used in pharmaceutical industry.

Interface Mode *

SKU: ATO-MDP-3HP

Qty:

30-day Returns

Free Shipping

Delivery date: 10-12 days

Overview
Manual

A 3 hp magnetic drive pump refers to a type of industrial pump that utilizes magnetic coupling to transfer power from the motor to the pump impeller without a direct mechanical connection. Magnetic drive centrifugal pump adaptable to IEC standard motor. This type of pump is suitable forchemical industry and metal industry.

Features:

ETFE (carbon-fiber reinforced) wetted-end material.
Able to handle many types of chemical and temperature up to 90 ℃.
Available in flange connections.

Specification:

Model	ATO-353PW-F
Specific Gravity	1.2
Frequency	50Hz, 60Hz
Rated Voltage	3-phase 380V (please contact us for other voltages)
Pump performance at specific point (M-L/min)	50Hz	24-150
	60Hz	32-120
Motor Output	3 HP (2.2 kW)
Flange Size	32 mm (outlet); 32 mm (inlet)
Casing Material	ETFE
Shaft Material	ceramic
Bearing Material	carbon
O-ring Material	FKM
Interface Mode	thread, flange
Net Weight	46kg

Structure:

Dimension (Unit: mm)

Model	W	H	L	a	b	c	d	e	f
352PW-F	160	242	505.5	222.5	132	155	130	120	78

Tips: How to Prime a Magnetic Drive Pump?

Ensure the magnetic drive pump is turned off and disconnected from the power source.
Open the suction valve on the inlet side of the pump.
Pour liquid into the inlet until the pump is filled.
Close the suction valve.
Turn on the pump and let it run for a few seconds to ensure that it is working properly.

It is important to never run a magnetic drive pump dry as this can cause damage to the pump. Always ensure that the pump is primed with the appropriate fluid before turning it on.

Existing reviews of 3 HP (2.2 kW) Magnetic Drive Pump

The max RPM for the magnetic drive pump

Hi, I was wondering what's the max RPM for the magnetic drive pump 350PW-F? May we know your available supply voltage, and frequency?

From: Jefferson | Date: 26/09/2024

Was this review helpful? Yes No (0/0)

ATO Responded

Our pump needs to use VFD to adjust the speed. The normal adjustable frequency range is 30-60Hz. 30Hz speed is 1700RPM, 50Hz speed is 2900RPM, 60Hz is the maximum speed 3500RPM.

Good Quality Refined Design

It's a good little drive pump for the price, and It works perfectly when fitted with a ball valve to control flow. I'd purchase again.

From: eva | Date: 04/12/2023

Was this review helpful? Yes No (0/0)

Write your review for 3 HP (2.2 kW) Magnetic Drive Pump