Shopping Categories
    Filters
    Preferences
    Search

    20w All-in-one Portable Fiber Laser Marking Machine

    $13,181.82
    Favorable price portable fiber laser marking machine, faster marking speed, more sophisticated engraving effect, 20w output power, maintenance-free and long service life.
    SKU: ATOF20PI
    Free shipping
    Delivery date: 6-12 days

    Fiber laser marking system features:

    • Marks widest variety of materials, including steel, titanium, aluminum, copper, ceramics and some plastics.
    • 100,000+ hours of laser life, reducing costs and production downtime.
    • 110mm2 mark field (other sizes available).
    • No consumables and minimal maintenance help reduce operating costs.
    • Air-cooled 10W-20W models.
    • Higher beam quality than flash lamp, diode pumped and vanadate, resulting in a high quality mark.
    Basic Information
    Model ATOF20PI
    Weight 44 lbs. (20 kg)
    Dimension 700mm x 210mm x 650mm (27.56" x8.27"x25.59")
    Distance (scanner to working plateform) 160~284mm (6.3" x 11.18")
    Platform size 210mm x 150mm (8.27" x 5.91")
    Warranty 2 Years
    System Technical Specifications
    Laser type Fiber; Ytterbium doped
    Output power 10W, 20W
    Power requirements 10W 20W: 220 V AC, 16 A, 50/60 Hz
    Wavelength 1070 nm
    M2 <1.4
    Operation mode Pulsed
    Pulse rep rate 20-80 kHz
    Cooling 10-20W: Fan assisted air cooling
    Scanning method XY galvanometer
    Max line speed 7,000 mm/sec
    Controls LEC 1 industrial computer based controller
    Communications USB ports, Ethernet, EtherNet/IP™, RS232
    Documentation USB flashdrive with operator's manual and integration guide; Online video troubleshooting
    Lens Configurations
    Lens Marking field Focal length
    100mm 65mm x 65mm (2.5" x 2.5") 97mm (3.82")
    160mm 110mm x 110mm (4.3" x 4.3") 175mm (6.89")
    254mm 175mm x 175mm (6.9" x 6.9") 296mm (11.65")
    330mm 228.6mm x 228.6mm (9" x 9") 387mm (15.23")

    Material: Plastic, steel, stainless steel, magal, zinc alloy, copper, nickeling, zincing, alox.

    Tips: Operation cautions of laser marking machine

    1. Before marking, test on scrap first. Mark bulk product after no error is found. Before marking codes, check the code carefully, for fear of any mistake.
    2. Make sure that the fiber laser marking machine is started up and shut down normally. Avoid sudden power lost or direct power off. The general order is as below: Turn on the power, start up the machine, work normally, shut down, and turn off the power.
    3. Before starting up the laser marking machine, take down the protective cover of the laser head. When starting up the machine, don't put any object under the laser head, for fear that the laser light will break the object.
    4. Be careful when using the machine, in case of being injured. When marking, don't put your hand under the laser light to prevent being hurt.
    5. After use, turn off the computer and the laser marking machine. Cover the machine up.
    Write your review for 20w All-in-one Portable Fiber Laser Marking Machine
    • Bad
    • Excellent