Mini Clamp Meter, AC Current 600A, NCV/TRMS/Capacitance/Temperature Function

Promotion: If you buy ≥3pcs clamp meters at one time, you will get 10% discount.

Digital clamp meter has AC current range 0-600A, TRMS/NCV/temperature/capacitance functions, maximum jaw opening size 28mm, 4 digit display and maximum value 1999.

Specification:

Tips: Clamp meter NCV function, the Non-Contact voltage measurement
Set the function range switch to the NCV position. At this time, the digital clamp meter displays 'NCV' and '----'symbols, and the top of the clamp meter is close to the object to be detected such as the mains phase line, the power switch and the outlet. When the voltage is detected to be greater than 110V (AC RMS), the meter lights up the corresponding signal strength indicator (high, medium and low) according to the detected signal strength, and the buzzer will give out alarm at different frequencies.
Note:

1. Even if there is no indication, the voltage may still exist. Do not rely on non-contact voltage detectors to determine if there is voltage on the shield. Detection operations may be affected by socket design, insulation thickness and type of different factors.
2. When the input voltage of the instrument input terminal, due to the existence of induced voltage, the voltage sensing indicator may also be bright.
3. Sources of external environment interference (such as flash, motor, etc.) may falsely trigger non-contact voltage detection.