USB to RS485 Converter, Two-way Conversion

5 out of 5 based on 1 reviews | Write a review

$51.59

USB to RS485 converter with RS-232 DB9 female, RS-485 DB9 male connector/ terminal block two kinds of connectors, transmission distance 1200m for RS-485, 5m for RS-232. Its advantage is that it supports hot swap, plug and play, and fast transmission speed.

SKU: ATO-UT-2201

This product has a minimum quantity of 2

Qty:

30-day Returns

Free Shipping

Delivery date: 6-12 days

Overview

Lower price USB to RS485 adapter cable with 300bps-115.2Kbps baudrate, asynchronous half-duplex differential transmission working mode, -25℃ to 70℃ operating temperature.

Specification

Model	UT-2201
Standards	RS-232C, RS-485 EIA/TIA
Connector	RS-232 DB9 female; RS-485 DB9 male, with terminal block
Working mode	Asynchronous half-duplex differential transmission
Transmission media	Twisted-pair or shielded cable
Baudrate	300bps-115.2Kbps
Dimension	63mmX33mmX17mm
Operating temperature	-25℃ to 70℃
Relative humidity	5% to 95%
Transmission distance	1200m(RS-485), 5m(RS-232)
Weight	1kg
Certificate	RoHS, CE, FC
Warranty	12 months

Dimension (mm)

Dimension of USB to RS485 two way

Details

Tips: The difference between RS232 and RS485 Converter.

1. Communication quantity of the interface:
As mentioned above, the RS232 interface can only connect 1 transceiver on the bus, and does not support multi-station transmission and reception, so it can only communicate with point to point.
The RS485 interface allows up to 128 transceivers to be connected on the bus. That is, it has multi-station communication capability, so that users can use a single RS485 interface to easily establish a device network.
2. Electronic characteristics of the interface:
RS232 transmission level signal: The signal level of the interface is high, which is easy to damage the chip of the interface circuit, and because it is incompatible with the TTL level, a level conversion circuit is needed to connect to the TTL circuit. In addition, the anti-interference ability is poor.
RS485 transmission differential signal: logic "1" is represented by the voltage difference between the two wires as +(2-6) V; logic "0" is represented by the voltage difference between the two wires as -(2-6) V. The interface signal level is lower than RS-232, it is not easy to damage the chip of the interface circuit, and the level is compatible with the TTL level, and it is convenient to connect with the TTL circuit.

Existing reviews of USB to RS485 Converter, Two-way Conversion

Bidirectional conversion and easy to connect

This converter supports bi-directional communication and can convert USB interface to RS485 communication protocol in both directions. Installing and connecting this converter is usually relatively simple - just connect the USB port to the computer and then connect the RS485 port to the RS485 device.

From: Levy | Date: 19/09/2023

Was this review helpful? Yes No (0/0)

Load more reviews...

Write your review for USB to RS485 Converter, Two-way Conversion