Buy mini 3V DC signal relay online, contact form DPDT (2C), widely applications in automatic control system.
- 2A contact switching capability.
- High sensitive type, coil power is 150mW/200mW.
- Standard DIP construction terminal.
- Ultra – small type, gold – plated contacts.
- Suit for complete machine wave soldering and integral cleaning process.
- Main applications: Electric power protection, automation, communication.
|Coil Parameters (23℃)
|Contact Resistance (Initial)
||≤100mΩ (6VDC 1A)
||AgNi + Gold Plating
||Rated Load (Resistance Load)
|Max. Switching Voltage
|Max. Switching Current
|Max. Switching Capacity
|Min. Allowing Load
||Insulation Resistance (Initial)
|Dielectric Strength (Initial)
||Between Open Contacts
||750VAC, 1 min
|Between Coil & Contacts
||1500VAC, 1 min
||10Hz ~ 55Hz 1.5mm DA
||1 x 107ops
||1A 125VAC 1 x 105ops (ON/OFF=1s/9s)
|2A 30VDC 1 x 105ops (ON/OFF=1s/9s)
||-40℃ ~ 85℃
||5% to 90%
||PCB (DIP Encapsulation)
Note: In order to maintain the initial performance parameters of the signal relay, please be careful not to drop it.
Tips: Working principle of signal relay
Generally, the signal relay is composed of iron core, coil, armature, contact reed. As long as a certain voltage is applied to both ends of the coil, a certain current will flow through it, resulting in electromagnetic effect. Under the action of electromagnetic force, the armature will overcome the tension of the return spring and attract to the iron core, thus driving the moving contact of the armature and the static contact (normally open contact) to attract. When the coil is powered off, the electromagnetic suction will also disappear, and the armature will return to its original position in the spring reactive force, making the moving contact and the original static contact (normally closed contact) release. In this way, it achieves the purpose of conducting and cutting in the circuit.