5 kVA Single Phase Automatic Voltage Stabilizer for Home

5 out of 5 based on 3 reviews | Write a review

$558.57

The provided LED display automatic voltage stabilizer is a kind of relay control stabilizer with 5 kVA, single phase, 95-125V/190-250V AC input voltage range, 110/220V output supply with an accuracy of +/-3%. It has the advantages of high efficiency, reliable performance, is ideal for the domestic purpose.

Phase *

1-phase (L, N, G)
split-phase (L1, L2+G)

Output Voltage (AC) *

Output Voltage *

SKU: ATO-AVS-1P5K

Qty:

30-day Returns

Delivery date: 10-20 days

Overview
Relative Video

5 kVA Single Phase Automatic Voltage Stabilizer for Home with features like automatic restart, turn-on delay, time-delay system and high & low voltage cut-off that provide efficient and reliable protection for home electronic appliances against voltage problems.

Specifications

Product Name	Automatic Voltage Stabilizer
Model Number	ATOSVC-5000
Technology	Relay Control System+Programmed control computerized+control algorithmn relay"Cross zero"
Capacity	5 kVA (The power capacity of voltage stabilizer needs to be 1.5~2 times greater than the load power)
Phase	Single Phase
Input Voltage Range	±15% tolerance of output voltage
Output Voltage	220V±3%/ 230V±3%/ 240V±3%/ 110V±3%
Adjust Time	<1sec. (Against 10% input voltage deviation)
Frequency	50Hz/60Hz
Current Type	AC
Protection Over Voltage	<250±2V
Protection Lack Voltage	<185±2V
Ambient Temperature	-10°C~+40°C
Insulation Resistance	≥5MΩ
Temperature Protection	110℃±10℃
Relative Humidity	<90%
Wave Form Distortion	No additional wave form distortion
Efficiency	>95%
Display	LED
Protection Grade	IP20
Dielectric Strength	1500V/min
Certification	CE, RoHS
Warranty Period	12 months
Weight	14 Kg
Size	LxWxH=470x240x190mm
Note: The provided 5kVA voltage stabilizer is 1-phase (L, N, G) in accordance with Europe standard. And we can customize the split phase (L1, L2 + G) like USA standard, just confirm us by email after ordering.

Details

4 tips for maintenance a voltage stabilizer

The voltage stabilizer should be placed in well ventilated and dry indoors, without direct sunlight or corrosive gas.
The voltage stabilizer power should be larger than total power of all power consumption equipment.
The voltage stabilizer switch can't be used as master switch of devices. Turn on the voltage stabilizer switch first, then connect different power consumption equipment by an increasing order of power as there's power output. When turning off devices, follow a decreasing order of power and turn off the voltage stabilizer switch at last.
The voltage stabilizer switch shall not be turned off frequently, interval between two turn-on shall not be more than 10 seconds, otherwise the voltage stabilizer would be protected by mistake, or even damaged.

In this video ATO uses a voltage regulator and multimeter to test the output voltage of the 3 kva voltage stabilizer which has 140V to 270V AC input, 220V AC output. After testing, we may see that the output voltage is within 220V ± 6%, which is in line with the standard.

Existing reviews of 5 kVA Single Phase Automatic Voltage Stabilizer for Home

Can you provide a 5kW automatic voltage stabilizer with 120V output voltage?

Can you provide a 5kW automatic voltage stabilizer with 120V output voltage?

From: Roby | Date: 21/01/2022

Was this review helpful? Yes No (0/0)

ATO Responded

Yes, we can provide a 5kW automatic voltage stabilizer, input: 1ph, 90-130AC, and output: 1ph, 120V.

High quality and good price

Not much to say. I plugged it in and trust my voltage is regulated. I have my PC, TV and entertainment set up connected to this voltage stabilizer and it works well. For the price point this unit does very well! Highly recommend it.

From: Timbo | Date: 09/10/2019

Was this review helpful? Yes No (0/0)

Will buy a 5kVA voltage stabilizer with 120V output

Can you provide 5kVA Automatic Voltage Stabilizer with 120V output voltage? I would like to buy one for home applicances.

From: Metie | Date: 05/09/2019

Was this review helpful? Yes No (0/0)

ATO Responded

Yes, We can provide 5kW Automatic Voltage Stabilizer, input: 1ph, 90-130AC, and output: 1ph, 120V. The delivery time is approx 10 days after payment is made.

Load more reviews...

Write your review for 5 kVA Single Phase Automatic Voltage Stabilizer for Home