(0) Shopping cart
You have no items in your shopping cart.
Shopping Categories

    50 hp (37 kW) 3 Phase AC Input Line Reactor for VFD

    5 out of 5 based on 1 reviews | Write a review
    The voltage specification of the AC input line reactor ranges from 220V to 480V, and the rated current is 90A, with 37 kW power, 3 phase for VFD, the frequency is 50Hz/60 Hz. Affordable and factory direct sales.
    SKU: ATO-ILR-037
    Free Shipping Worldwide
    Delivery date: 6-12 days

    50 hp Input Line Reactor Features

    This high quality and safety AC input line reactor has 220V, 380V, 400V, 460V, 480V,etc., with 90 Amps, and its power is 37 kW, 3 phase for VFD. Low price, long life and high performance, widely used in various power supply places with frequency 50Hz/60 Hz.

    50 hp Input Line Reactor Specifications

    Basic Model ATOACR-0090-0M16-0.4SC
    Phase 3 Phase
    Power 50 hp (37 kW)
    Weight 17 kg
    Technical Parameters Work Valtage 380V (optional: 220V/ 240V/ 400V/ 415V/ 440V/ 460V/ 480V)
    Work Frequency 50Hz/60 Hz
    Rated Current 90 A
    Max Current 1.5 Times the Rated Current, Continued 60s
    Inductance Value 0.156 mH
    Material Aluminium/Copper (Optional)
    Voltage Drop 2%
    Noise ≤65dB
    Insulation Class Class F, H
    Protection Class IP00-IP22
    Insulation Resistor ≥100MΩ
    Working Environment Operation Environment -10℃~+45℃
    Temperature Rise ≤85K
    Humidity ≤90%RH, without condensation
    Running Ambient Temperature -25℃~+45℃
    Altittude ≤2000m

    50 hp Input Line Reactor Size & circuit diagram

    picture circuit diagram

    Dimension (±5mm)
    L D W W1 H A×B
    195mm 120mm 150mm 92mm 165mm 8.5×20


    Adding an input reactor to the input end of the VFD can suppress the harmonics generated by the VFD to the grid, reduce the interference generated by the VFD to other electrical equipment, and limit the abnormal fluctuation of the grid voltage and the inrush current on the grid. Reduce its impact on the drive. The output voltage of a general-purpose VFD contains harmonics other than the fundamental wave. The lower harmonics usually have a great influence on the motor load, causing torque ripple, and the higher harmonics increase the leakage current of the VFD output cable, which makes the motor output insufficient, so the high and low harmonics of the VFD output are Must be suppressed. Adding an AC output reactor on the output side of the VFD can optimize the AC waveform output by the VFD, suppress the harmonic current, prevent the ground leakage current caused by the capacitance to the ground of the VFD, and extend the cable length from the VFD to the motor side.

    Existing reviews of 50 hp (37 kW) 3 Phase AC Input Line Reactor for VFD
    High quality, high performance, affordable
    Old customers, the quality of the products is very good,
    AC Input Line Reactor is quite suitable for my heart
    Delivery is also very fast
    From: cindy | Date: 20/11/2018
    Was this review helpful? Yes No (0/0)
    Write your review for 50 hp (37 kW) 3 Phase AC Input Line Reactor for VFD
    • Only registered users can write reviews
    • Bad
    • Excellent