Shopping Categories
    Filters
    Preferences
    Search

    EMI Line Filter, 75A, 3 phase

    $106.15
    EMI line filter, 3-phase single-stage, rated current 75A, maximun voltage rating to 440V AC, well-perform in the normal 3-phase motor drives and the 3-phase power for elevators, UPS, automatic equipment etc.
    SKU: ATO360-75
    Free shipping
    Delivery date: 6-12 days

    75A EMI line filter works in 50/60Hz operating frequency, compact structure, easy to install, excellent differential mode and common mode attenuation performance.

    Specification

    Basics Model ATO360-75
    Type 3-phase single-stage
    Operating temperature -25℃~85℃
    Weight 1.6kg
    Installation Screw M8
    Technical parameters Rated voltage(Max) 440V AC
    Operating frequency 50/60Hz
    Hipot rating(one minute) Line to line 2250V DC
    Line to ground 2700V DC
    Rated current(@ 40℃) 75A
    Leakage current(Line to ground) ≤1mA @ 250V AC 50Hz
    Insulation Resistance(Line to ground) 200MΩ @ 500V DC for one minute
    Inductance L 0.3mH
    Capacitance CX 1μF
    CY 10nF
    Resistance R 0.22 MΩ
    Insertion loss in dB (measured in 50Ω system)
    Frequency(MHz) 0.1 0.15 0.5 1 5 10 30
    Common mode(line to ground) 4 6 15 20 40 50 57
    Differential mode (line to line) 16 30 48 51 57 75 68

    Dimensions

    emi filter dimensions 75a 100a

    Electrical schematic

    electrical schematic

    Tips: How to select power line filter?

    1. According to equipment rated working voltage, current and frequency, it can confirm filter type. Don’t take too small rated current of filter, otherwise it will damage filter or reduce filter life time. Don’t take too large rated current, because large current will increase filter dimension or reduce filter electrical performance. Normally confirm filter rated current according to 1.2 times of equipment rated current.
    2. According to field interference source of equipment, confirm types of interference noise, common mode interference or differential mode interference, and then select the suitable filter. If interference type can’t be confirmed, thus confirm filter model according to practical exploration, which is a practical and effective method.
    3. Select a filter according to allowable value of maximum leakage current, especially for some medical care equipment.
    Write your review for EMI Line Filter, 75A, 3 phase
    • Bad
    • Excellent