Explosion-proof Temperature and Humidity Sensor, 4-20mA/RS485

5 out of 5 based on 1 reviews | Write a review

$476.52

High performance and reasonable price explosion-proof temperature and humidity sensor for sale online. 4-20 mA and RS485 two types of output signal are available. Transfer part of temperature and humidity sensor adopts a fully sealed flameproof enclosure. Explosion-proof temperature and humidity sensor widely used in coal mining, metallurgy, food and brewing.

Output Signal *

SKU: ATO-TAHS-EP

Qty:

30-day Returns

Free Shipping

Delivery date: 6-12 days

Overview
Documents

High precision explosion-proof temperature and humidity sensor has the advantages of anti-impact and anti-aging. The external mounting hole is easy to install, which makes the response speed of the temperature and humidity sensor fast.

Specifications

Model	ATO-ME-WS-GB
Power Supply	10-30V DC
Resolution	Temperature: 0.1℃; Humidity: 0.1%RH
Accuracy	Temperature: ±0.2℃ (at 20℃)
Accuracy	Humidity: ±2%RH (10%RH-80%RH); ±3%RH (0%RH～10%RH; 80%RH～100%RH) (at 20℃)
Measurement Range	Temperature: -40℃～80℃; -20℃～60℃ (with Display)
Measurement Range	Humidity: 0%RH～100%RH
Response Time	<200mA
LCD Refresh Rate	<1.2s
Output Mode	4-20mA (Included Two Signal: Humidity+Temp, 5 Wire); RS485
Installation Method	Wall-mounted, Fixed on the Wall
Enclosure/Protection Level	Cast aluminum, IP66 (Without Probe)
Explosion-Proof Mark	Exd IIC T6 GB
Electromagnetic Compatibility Standard	EN 61000-6-1; EN 61000-6-3; EN 61000-3-2; EN 61000-3-3

Dimension （Unit: mm)

Wiring

Tips: Precautions For Explosion-proof Temperature and Humidity Sensor Use

To turn the screw on the top cover, press the screw with a screwdriver and then turn the screw.
When connecting terminals, do not strip the cables too long, and do not expose the copper wires directly inside the product to avoid short-circuit risks.
Disconnect the power supply before connecting the circuit.
Do not touch internal components directly with hands or metal objects.
After the installation is complete, check the screws on the cover and whether the waterproof connector is locked. The wire diameter must be 4-8mm.
5 minutes after switching on the power supply, the calibration operation will be carried out. Otherwise, the data output will not be accurate.

Existing reviews of Explosion-proof Temperature and Humidity Sensor, 4-20mA/RS485

About probe

Hi, I am looking at your explosion proof temperature and humidity sensor ATO-TAHS-EP. I am curious if it comes with the probe itself, I just don't see anything confirming that and most pictures show it without the probe. Additionally, is there any offset to the output depending on temperature? Thank you.

From: Shelina | Date: 19/01/2025

Was this review helpful? Yes No (0/0)

ATO Responded

Our temperature and humidity sensor ATO-TAHS-EP does Not have a probe. It directly displays the temperature and humidity values from the sensor output, and there is No temperature offset.

Write your review for Explosion-proof Temperature and Humidity Sensor, 4-20mA/RS485