Close
(0) Shopping cart
You have no items in your shopping cart.
Shopping Categories
Preferences
Search

400W 100~3050mm Belt Driven Linear Slide

$1,232.31
Linear slide works with 400W servo motor. Stroke 100mm~3050mm for selection, max speed 2000mm/s, belt width 30mm, lead range 40mm, max payload 45kg, rated thrust 204N. Linear guide rail driven by belt, matching motor and sensor are optional.
*
*
*
SKU: ATO-LS-3050400
30-day Returns
Free Shipping
Delivery date: 6-12 days

Belt driven linear slide guide rail, slide block, motor, sensor and coupling form the linear motion system. 31 values of stroke for selection, from 100mm to 3050mm, maximum speed 2000mm/s, belt width 30mm, lead range 40mm.

Basic Specification

Model ATO-GB170
Stroke 100mm~3050mm (100mm pitch)
Belt Width 30mm
Repeatability Accuracy ± 0.04mm
Lead Range 40mm
Max. Speed 2000 mm/s
Max. Payload

Horizontal 45 kg
Vertical -
Rated Thrust 204 N
Matching Servo Motor Power* 400W
Home Sensor Outside EE-SX672 (NPN)
Built-in EE-SX674 (NPN)

*Note: The servo motor is not included in packing list, if you need one, please contact us.

Speed Chart

Model Body Width (mm) lead Range (mm) Max. Payload (kg) Max. Speed (mm/s) Standard stroke and recommended use of the highest speed (mm/s)
Horizontal Vertical 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3050
ATO-GB170 170 40 45 - 2000 - - - - - - - - - - - - - - - 2000

Note: The highest speed is based on the maximum speed of servo motor (3000 rpm).

Features

  • The linear slide guide rail adopts synchronous belt transmission, high speed, equipped with servo motor up to 2000mm/s, repeat accuracy ±0.04, especially suitable for high-speed linear motion requirements.
  • The belt driven linear slide is a semi-enclosed linear motion system, which is mainly composed of aluminum body, guide rail, diagonal bearing holder, cover plate, slide block and other components.
  • Linear slide guide rail uses corrosion-resistant, high-strength aluminum alloy as the base. A high-precision linear guide pair is installed in the base. The aluminum alloy motion base is installed on the slide block. The middle part of motion seat is connected with the nut of ball screw.
  • Motor of the motorized linear slide drives the sliding table to reciprocate through the ball screw rod.
  • The diagonal bearing holder ensures the repeatability and positioning accuracy of motion seat. The aluminum alloy cover is installed on the motion base for overall protection.

Motor Mounting Dimensions (Unit: mm)

400W linear slide motor mounting dimensions

Motor Power Motor Size Shaft Diameter
400W 60mm 14mm

Tips: How to solve the heating problem of 400W belt driven linear slide?

Generally, the 400W belt driven linear slide will generate heat more or less during operation. For example, the heating during high-speed reciprocating linear motion is normal. Stop the linear slide for a few minutes and restart it.

In addition to normal heating, 400W belt driven linear slide will also have abnormal heating. For example, water droplets on the 400W belt driven linear slide, it will vaporize immediately, and there will be tremble at the same time. If this situation is not dealt with in time, the belt driven linear slide is likely to be damaged due to heat, or wear the belt and guide rails. This will affect the service life of the belt driven linear slide. This heating is generally caused by the slider, that is, the slider is the root cause of this abnormal heating phenomenon. At this time, users can check whether the slider part is malfunctioning, or directly replace the slider.

Write your review for 400W 100~3050mm Belt Driven Linear Slide
  • Only registered users can write reviews
  • Bad
  • Excellent