Close
(0) Shopping cart
You have no items in your shopping cart.
Shopping Categories
    Filters
    Preferences
    Search

    Digital Clamp Meter AC 400 amp with TRMS/NCV/Temperature/Capacitance

    $81.89
    $90.99
    AC clamp meter is a digital clamp multimeter with a selection dial. Digital clamp meter has the measuring range of AC current 0-400A, AC/DC voltage 0-600V, resistance 0-10MΩ, frequency 0-1000kHz, capacitance 0-100mF and temperature -40℃~+1000℃ (-40℉~1832℉). Digital clamp meter has Ture-RMS and NCV functions. The maximum jaw opening size is 25mm.
    SKU: ATO-CLAM-2019C
    Free Shipping Worldwide
    Delivery date: 6-12 days

    Promotion: If you buy ≥3pcs clamp meters at one time, you will get 10% discount.

    Digital clamp meter has AC current range 0-400A, TRMS/NCV/temperature/capacitance functions, maximum jaw opening size 25mm, 4 digit display and maximum value 5999.

    Specification:

    Basics Model ATO-UA2019C
    Weight 0.4kg
    Size (L*W*H) 184*66*32.5mm
    Display 4 digit LCD display
    Maximum display value 5999
    Power supply DC 4.5V, 3 AAA batteries
    Maximum jaw opening size 25mm
    Woring environment Temperature: 18℃~28℃ (64.4℉~82.4℉), relative humidity:<75%
    Storage temperature -10℃~+50℃ (14℉~122℉)
    Accessories A pair of test probes, a pair of temperature probes, a user manual, 3 AAA batteries
    Functions Item Range Accuracy
    AC current 400A ±(1.5%+5 digits)
    DC voltage 600V ±(1.0%+5 digits)
    AC voltage 600V ±(1.2%+5 digits)
    Residence 10MΩ ±(1.0%+2 digits)
    Frequency 1000kHz ±(0.3%+5 digits)
    Capacitance 100mF ±(4.0%+3 digits)
    Temperature -40℃~+1000℃ (-40℉~1832℉) ±(1.0%+3 digits)
    Special functions TRMS True RMS measurement for sine wave signal
    NCV Non-contact voltage test, with buzzer and indicator
    Diode test Display forward voltage value of diode
    On-off buzzer Continuity test buzzer
    Data hold Hold the reading when taking a measurement
    Automatic power off Automatic power off when 15 minutes no operation
    Overload protection Overload protection for 100% range
    Range selection Automatic range selection and manual range selection
    Back light Back light for LCD display
    Inspection light Inspection light for clamp operation

    Tips: How to measure AC current with a clamp meter?
    The clamp meter is a special digital multimeter with clamp head for current measurement. So make sure that the test probes are removed from the clamp meter when using the clamp head to measure AC current. Then follow the operation steps below step by step.

    1. Rotate the measurement function selection dial to the AC current.
    2. Press the trigger to open the clamp, pass the wire to be measured into the centre of the clamp, and then slowly release the trigger until the clamp is fully closed.
    3. Read the measurement result from the LCD.

    Note: The clamp meter can only measure one current conductor at a time. If two or more current conductors are measured at the same time, the measurement will be inaccurate.

    Write your review for Digital Clamp Meter AC 400 amp with TRMS/NCV/Temperature/Capacitance
    • Only registered users can write reviews
    • Bad
    • Excellent