(0) Shopping cart
You have no items in your shopping cart.
Shopping Categories

    pH Electrode for Flue Gas Desulfurization

    5 out of 5 based on 1 reviews | Write a review
    Flat pH electrode for flue gas desulfurization (FGD), shell material PPS/PC, 0-60℃ (32-140℉) temperature range, direct lead, 6 months service life.
    SKU: ATO-PHELE-5012
    30-day Returns
    Free Shipping
    Delivery date: 6-12 days

    PH electrode can be used for pH measurement of flue gas desulfurization (FGD), or other harsh environment, such as whitewash, seriflux, etc.


    • Adopt aerogel electrode, easy to maintain.
    • Adopt flat glass bulb, good resistance to contamination and impact.
    • High accuracy in high temperature or high pH value.
    • High-quality low-noise cable, can achieve 60m long distance signal transmission.


    Model ATO-PHETE-PH5012
    Weight 1kg
    Measuring range 0-14pH
    Accuracy 0.02pH
    Temperature range 0-60℃ (32-140℉)
    Temperature compensation * Internal temperature sensor (NTC 10K)
    Zero position 7±0.3pH
    Compressive strength 0.6MPa
    Slope ≥96%
    Installation size 3/4NPT in both ends
    Shell material PPS/PC
    Connection Direct lead
    Cable length * 5m/10m/15m, or other length less than 50m (need customization)
    Service life 6 months

    PH electrod installation methods:
    PH electrod installation methods
    1. Side wall installation (*The pH electrode must be at an angle of 15 degrees to the liquid surface. Otherwise, it will affect the normal use of the pH electrode.)
    2. Flange mounted at the top
    3. Pipe installation
    4. Top installation
    5. Submersible installation
    6. Flow-through installation

    Tips: Categories of pH electrode
    Currently, there are three kinds of pH electrode: liquid electrode, gel electrode and solid electrode.

    1. Liquid pH electrode
      Liquid electrode is a filling-type liquid electrode, it’s the most typical, the most outstanding quality and the most widely applied electrode in the history of pH electrodes. It’s suitable for measurement of various industrial processes.
    2. Gel pH electrode
      Gel electrode is an improved liquid electrode. Such an electrode requires few maintenance and is suitable for on-line measurement with serious requirements. It can still work for a long time after many times of CIP (Cleaning In Place) and SIP (steam sterilization).
    3. Solid pH electrode
      Solid electrodes are widely used in chemical industry. Applying new solid polymer reference electrolyte, its service life prolongs while maintaining accurate pH measurement, moreover, it can maintain good performance even in the worst industrial environment.
    Existing reviews of pH Electrode for Flue Gas Desulfurization
    Very useful
    The signal transmitted by the ph electrode is very accurate, and is basically consistent with the on-site test. After using the ph electrode for flue gas desulfurization, it can effectively help me to perform desulfurization treatment in time. The FGD ph electrode is very suitable for use in the desulfurization tower. The entire ph monitoring system works well. The pH electrod is really very useful.
    From: Even | Date: 27/09/2018
    Was this review helpful? Yes No (0/0)
    Load more reviews...
    Write your review for pH Electrode for Flue Gas Desulfurization
    • Only registered users can write reviews
    • Bad
    • Excellent