Proximity Sensor, Capacitive, M30, 2 Wire, 110V

5 out of 5 based on 1 reviews | Write a review

$39.55

M30 proximity sensor can detect nonmetal (or metal), plastic, water, liquid level and powder height, with small size, long life, low cost, unshielded type installation, anti-interference ability, 20mm detection distance, supply voltage AC 110V, manufacturer direct sale. The proximity sensor features insulation resistance of ≥50MΩ between the charging section and housing (DC500 megohmmeter) and an IP67 protection rating.

Specification Selection *

SKU: ATO-PROS-C30

Qty:

30-day Returns

Free Shipping

Delivery date: 6-12 days

Overview
Related Video

Capacitive proximity sensor with M30*1.5 thread, AC 2 wire output, manufacturer direct sale. The capacitive proximity sensor shell is made of nickel-plated brass, and the detection surface is made of ABS plastic, which is highly corrosion-resistant.

Functions

Red LED checks the state of proximity sensor
High repeated positioning accuracy
High switching frequency
Wide voltage range
Antivibration, dust, water and oil prevention
Reverse power protection, short circuit protection, directly connecting with PLC

Specification

Model			ATO-PSC-30AHJ
Installation type			Unshielded	Shielded
All the output methods	DC type	NPN	NO	NO
			NC	NC
		PNP	NO	NO
			NC	NC
	AC type	2 wire	NO	NO
			NC	NC
Detection range			20mm±10%	10mm±10%
Setting distance			0-18mm	0-8mm
Delay distance			≤10% detection range
Detection object			Any dielectric substance
Standard detection object			SPCC iron 50501mm
Response frequency			DC: 0.5kHz, AC: 25Hz
Supply voltage			DC type: DC 12-24V (6-36V), impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz
Withstand voltage			AC1000V 50/60Hz 1min between charging part and housing
Voltage influence			Inside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption current			N/P type: ≤13mA, D type: ≤0.8mA, A type: ≤1.7mA
Control output			N/P type: ≤300mA, D type: ≤200mA, A type: ≤400mA
Loop protection			N/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidity			Operation temperature/storage temperature: -30~65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH
Temperature influence			Temperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance
Insulation impedance			≥50MΩ (DC500 megameter) between charging part and housing
Material			Housing: Nickel plated brass, Detection surface: ABS
Protection class			IP67
Cable length			1.2m

Dimensional drawing (unit: mm)

Wiring diagram

Tips: Parallel and series connection of proximity sensor

Parallel connection: OR connection, NPN and PNP type can't be used in combination. Parallel proximity sensors are in OR connection. The load can be driven once any one of proximity sensors is operating. The number of proximity sensor depends on the sum of leakage current. As long as it does not affect the load operation, more proximity sensors can be connected.
Series connection: When proximity sensors are in AND connection, the load can be driven by all the proximity sensors operation. The number of proximity sensors depends on the sum of their saturation voltages. As long as it does not affect the voltage of power supply, more proximity sensors can be connected. The response frequency of proximity sensor is the accumulation of initial reset of each proximity sensor.

How to Count Using Photoelectric Sensor?

In this video, ATO will show you how to count using slot photoelectric sensors and digital counters.

Change the PNP (NPN) proximity sensor to NPN (PNP)

The polarity of the proximity sensor has two types, PNP and NPN. We show you how to change the PNP (NPN) type proximity sensor to the NPN (PNP) type.

2-wire AC proximity switch/sensor wiring

We have proximity switches with a diameter of 4mm~30mm, applicable voltages are 24V DC/120V AC/240V AC, which can detect metal and non-metal objects.

Existing reviews of Proximity Sensor, Capacitive, M30, 2 Wire, 110V

Proximity sensor function as expected

I use the proximity sensor for touchscreen phones. It is so good that it works as expected. Low price and small size. It is installed in the phone that the sensor can tell when the phone is close to a person's face and turn off the touch function of the screen. It is easy to operate.

From: anna | Date: 26/10/2022

Was this review helpful? Yes No (0/0)

Write your review for Proximity Sensor, Capacitive, M30, 2 Wire, 110V