My Account

Shopping cart

Filters

Personal menu

Preferences

1.5 kW CNC ATC Spindle, 60000 rpm

5 out of 5 based on 3 reviews | Write a review

$1,752.32

Buy a 3 phase 1500W water-cooled automatic tool changer spindle motor from reliable ATC spindle manufacturers, works at 220V AC, 0.28 Nm torque, Φ3- Φ6 collet, high speed 60000rpm, and frequency up to 1000Hz, high precision & long life, enhances several times efficiency, perfect for CNC router machines.

SKU: ATO-SPINDLE-ATC1500

Qty:

30-day Returns

Free Shipping

Delivery date: 6-12 days

Overview

Low cost 1.5 kW water cooled ATC spindle motor, 60000 rpm speed, 0.28 Nm torque, Φ3- Φ6 collet, 1000Hz frequency, 3 phase 220V AC rated voltage, widely used in CNC drilling and milling equipment.

Features

Reasonable structure design, simple and compact configuration, easy to take apart.
High precision, inflexibility and efficiency, long operation life.
With high grade size, shape, position precision, and quality of the surface.
Enough abrasive resistance, vibration resistance, suitable size.
Work stable, low noise, enough fatigue strength.

Specifications

Model	ATO-DC-62F
Motor power	1500 W
Rated voltage	200V AC
Phase	Three phase
Max speed	60000 rpm
Max current	10 A
Max frequency	1000 Hz
Torque	0.28 N·M
Cone at the end of the shaft pulsates	≤0.001 mm
Tooling releasing air pressure	5.6-6.0 Kgf/cm²
Tooling change method	Automatic tool changer
Tooling pulling force	≥1200 N
Tooling back air pressure	No
Tooling connection	Φ3- Φ6 collet
Cooling	Water cooling
Encoder	No
Coolant pressure	≥2.5 Kgf/cm²
Approach switch	No
Bearing lubrication method	Grease
Balance level	G1
Install method	Clamp
Vibration Value	≤0.8 mm/s
Weight	3.9 Kg

Note: The spindle motor and VFD shall be suitable with each other. The specifications and parameter settings of the VFD shall match the nominal parameters of the spindle motor. Otherwise, it will burn the spindle motor if the settings are not correct.

Dimension (Unit: mm)

1500W ATC Spindle Dimension

Details

1500W CNC ATC Spindle Details

Tips: Working Principle of the ATC Spindle

The rear part of the main shaft is a cylinder structure. The inside of the cylinder uses air pressure to push the thimble against the middle rod to extend the chuck so that the tool falls off, and then the equipment can use the shaft platform to automatically grab the tool. The solenoid valve at the back of the spindle is used to release the air pressure to clamp the tool. This process is called automatic tool change, or ATC for short.

Existing reviews of 1.5 kW CNC ATC Spindle, 60000 rpm

This ATC spindle is well made.

I bought a 1.5kw CNC spindle for a work project. So far it has been working fine, I have no complaints with the motors at all. Quite a bit quiet than the last one I had, strongly recommend to the people who need a ATC spinle.

From: zyc | Date: 17/05/2022

Was this review helpful? Yes No (0/0)

Very nice spindle

The ATC spindle arrived quicker than expected, and the experience with this product is great. Thanks to the seller for helping it get it up and running properly, great customer service, I'm very satisfied.

From: Pearl | Date: 22/04/2022

Was this review helpful? Yes No (0/0)

Very quiet and improved dust control.

My spindle arrived on time, with very good protective packaging, and the simple instruction sheet was helpful. My spindle works well, is very quiet, and with no motor cooling fan forcing air through the spindle and onto the work piece to contend with, dust control, with my dust shroud, is greatly improved. I use it on a hobbyist CNC machine that I have. I’m very happy with it.

From: cxk | Date: 20/04/2022

Was this review helpful? Yes No (0/0)

Load more reviews...

Write your review for 1.5 kW CNC ATC Spindle, 60000 rpm

Only registered users can write reviews

Review title:

Review text:

Rating:

Bad
Excellent