Close
(0) Shopping cart
You have no items in your shopping cart.
Shopping Categories
    Filters
    Preferences
    Search

    Temperature and Humidity Sensor, Duct/Wall Mounted, One-wire

    $61.62
    Temperature and humidity sensor includes a capacitive humidity sensor and a digital temperature sensor, built-in one high-performance 8-bit SCM, standard one-wire interface, duct and wall mounted, all automated calibration, completely interchangeability, with excellent quality, fast response, strong anti-interference ability, high cost performance, low power consumption, long signal transmission distance above 20m.
    *
    SKU: ATO-TAHS-AM2305/5A
    30-day Returns
    Free Shipping
    Delivery date: 6-12 days

    Temperature and humidity sensor has a capacitive humidity sensor and a digital temperature sensor, standard one-wire interface, duct and wall mounted.

    Application: Temperature and humidity sensor is widely used in HVAC, dehumidifiers, automobile, data loggers, humidity regulators, and humidity detection and control system.
    Specification:

    Item AM2305B AM2305A
    Weight 40g 50g
    Dimension Ф16, length 97.4mm Ф16, length 150mm
    Communication mode One-wire
    Supply voltage DC 3.3-5.5V DC 3.3-5.5V
    Measuring range of relative humidity 0~99.9%RH
    Measuring range of temperature -40~+80℃
    Accuracy of humidity ±2%RH
    Accuracy of temperature ±0.3℃
    Resolution 0.1℃/0.1%RH
    Long-term stability <0.5%RH/year, <0.1℃/year
    Power consumption <300μA
    Sampling period 2s
    Response time <5s
    Housing material ABS Aluminum alloy
    Working environment Temperature: -40~80℃, humidity: 0~99.9% no condensation
    Storage environment Temperature: 0~60℃, humidity: <95%RH
    Wiring 1 red: VDD, 2 yellow: SDA (serial data), 3 black: GND

    Dimensional drawing (unit: mm):
    Temperature and humidity sensor dimensional drawing
    Pin assignment:
    Temperature and humidity sensor AM2305A pin assignment

    Details

    One-wire Temperature and Humidity Sensor Details

    Tips: How to set up a temperature and humidity sensor?
    The humidity sensor is not sealed. In order to protect the measurement accuracy and stability, the temperature and humidity sensor should not be used in acidic, alkaline and organic solvents. Environment with much dust shall also be avoided. To accurately reflect the humidity of the detected space, we should avoid placing the sensor in the corner which is close to the wall or the air is not well circulated. If the detected room is too large, several temperature and humidity sensors should be placed.
    Some temperature and humidity sensors have higher requirements to the power supply, otherwise the measurement accuracy will be affected, or the sensors may interfere with each other and even don't work. Therefore, please provide suitable power supply with required accuracy according to requirements in the application.
    When the temperature and humidity sensor needs long-distance signal transmission, we should pay attention to the attenuation of the signal. When the transmission distance is more than 200m, a temperature and humidity sensor with frequency output signal is recommended.

    Write your review for Temperature and Humidity Sensor, Duct/Wall Mounted, One-wire
    • Only registered users can write reviews
    • Bad
    • Excellent
    Customers who bought this item also bought

    AC Current Sensor, 1A/2A/10A/30A/50A/100A to 150A

    $76.35
    SKU: ATO-CUS-AC150
    AC current sensor adopts linear electromagnetic isolation principle, best cost performance, fast response, high accuracy, good stability, small size, light weight, 4mm/8mm/12mm/15mm hole diameter, and DIN rail installation. AC current sensor is widely used for AC current measurement of various occasions, especially for sine-wave ac current with power frequency 50Hz.

    3 Phase AC Current Transducer 0.5A/1A/2A/5A/10A/20A/50A to 80A

    $161.39
    SKU: ATO-CUS-3AC80
    AC current transducer is a special current sensor for 3 phase AC current measurement. Three phase current transducer adopts epoxy resin pouring sealant to ensure the stability of components, with 0.5%FS accuracy, three output signals 4-20mA/0-20mA/0-5V/0-10V, power supply DC 5V/12V/24V, fixed installation. 3 phase AC current transducer is widely used for real-time monitoring of power grid AC current.

    Solid state relay SSR-10DA, 10A 3-32V DC to AC

    $48.33
    SKU: ATO-SSR-DH10DA
    Cheap SSR-10DA, 10A single phase solid state relay, DC to AC, control voltage 3-32V DC, load volatage 24-480V AC. Excellent quality, high reliability and long lifetime.

    Solenoid Valve, 2 Way, Normally Closed, 12V/24V/220V for air water oil

    $50.75 $62.92
    SKU: ATO-VALVE-2W
    Low price 2/2-way normally closed solenoid valve, 2-way 2-position (N/C), has different port sizes 1/4", 3/8", 1/2", 3/4" to 2", and operating voltages DC 12V, DC 24V, AC 110V or AC 220V for options. Valve body is made of brass and sealing material is NBR, general-purpose solenoid valve for control the flow of air, water and oil with good medium compatibility, high reliability and long service life.

    PID Temperature Controller, Dual Digital, Universal Input

    $69.85
    SKU: ATO-TEMPC-2D
    PID temperature controller has dual digital 4 LED display, on-off control/PID control, support universal inputs (Cu50/Pt100/K/E/J/T/S/R, 4-20mA, etc.), 4 kinds of output mode for select (relay output/SSR output/SCR/transmitter output 4-20mA), and additional output RS485/232 communication output, timer relay, etc.