Sensors

Home or industrial turbine water flow sensor features a large DN80 interface and a wide 20-500L/min flow range. Turbine-type operation ensures consistent performance with a clear pulse output for easy integration and accurate data. Constructed from electroplated aluminum, this liquid flow sensor offers durability for demanding applications. Excellent value and dependable service are guaranteed for both domestic and commercial settings, providing reliable flow measurement with a simple pulse signal output.

The all-stainless steel water flow sensor for sale, with a variety of DN15~GN50 optional interfaces, is corrosion-resistant, high-pressure-resistant, highly accurate, and provides high flow rates, accurate measurement, and meets precision requirements. Compatible with a standard 5V power supply, it is easy to connect. This versatile sensor is a reliable choice for industrial fluid monitoring.

Factory price hydrostatic level sensor for settlement monitoring, measuring liquid media including water, antifreeze and silicone oil, providing high accuracy measurement up to 0.05% FS. Level sensor supports RS485 output signal, and its IP66 protection rating makes it dustproof and water jet resistant. It supports 5~28VDC wide voltage power supply, and the medium temperature range is -40℃~60℃.

Gear flow sensor with a nominal diameter of DN20 features a durable brass valve body and an imported hall sensor. Provides high accuracy, stable performance, and long service life for industrial flow monitoring.

Best wireless IoT water level sensor is for sale at factory price. Wireless liquid level sensor supports NB-IoT/4G/LoRa communication and enables remote cloud monitoring, allowing real-time data viewing and management. Its measurement range is 0-10m, with an accuracy of ±0.5% FS. It features IP65 industrial housing and IP68 probe, is suitable for various scenarios.

Oval gear flow sensor with hall effect is a high-precision industrial flow meter for oil, fuel, and viscous liquid measurement. Available in Nominal Diameters DN8, DN10, and DN15, made of durable aluminum alloy, it ensures accurate digital flow monitoring, strong wear resistance, and stable long-term performance.

Purchase piezoelectric force sensor at factory price. This piezoelectric load cell with 0 to 30000N measuring range, measures force by converting mechanical stress into an electrical charge through the piezoelectric effect, which is commonly used in applications requiring precise force measurements, such as in industrial automation, robotics, and quality control.

Compression force sensor, ring type for sale, with optional capacities of 0.5kN, 1kN, 2kN, 5kN, 10KN, 20kN, 50kN, 100kN, 200kN, has an output sensitivity of 1.0 ± 10% mV/V and a zero output of ±2%F.S. Made from stainless steel, the higher quality load cell has an impedance of 700Ω and insulation of ≥5000MΩ/100VDC. The operating voltage is 5-15V, and it performs within a temperature range of -20°C to 80°C. Hollow design, the main measurement of extrusion force, assembly interference detection and control of other industrial control force detection.

This tension force sensor with bearings is suitable for thin films and offers excellent durability and high accuracy performance. It offers a wide range of capacity options from 2.5kg to 50kg, accurate output sensitivity (1.0~2.0mV/V) for efficient data acquisition and feedback, and a response frequency of up to 1kHz for real-time monitoring of fast dynamic loads.

Higher quality tension force sensor for fiber and cable sold at a discount can measure tension of 10N, 20N, 30N, 50N, 100N, 200N, and 500N, with an output sensitivity of 1.0 ± 0.05 mV/V and a zero output accuracy of ±1% F.S. Force measuring load cells supports a maximum load of 300% R.C. and a cable pulling limit of 98N. Suitable for fiber optics, cables, and belts.

Flat plate force sensor for battery equipment with measuring range of 0-1/2/3/5 ton, has a sensitivity range of 1.5-2.0 mV/V and a non-linearity of ±0.5% F.S. The load cell has a full scale of ±0.5% F.S., with a drift of ±0.3% and zero output accuracy of ±1% F.S. It operates between -20°C and 80°C, with an input resistance of 750 ± 20 Ω and output resistance of 700 ± 5 Ω. Widely used in battery equipment force measurement, new energy projects and various engineering devices force measurement system.

Choose ATO grip force sensor which provides different range options from 0-10/20/100kg for hand strength test. Made of aluminum alloy with excellent anti-interference and durability, you will experience high precision and stable test performance.

AC voltage sensor is a 3 phase voltage sensor with a measuring range from AC 100V to 300V, supply voltage DC ±12V, output signal DC 0-5V, work temperature 0~50℃ and protection class IP20. Three phase voltage sensor can be used for electrical equipment, automation control and dispatching systems.

DC voltage sensors adopt photoelectric isolation principle, with measuring range from DC 100mV/1V/10V/50V to 70V, supply voltage DC 12V/24V, accuracy 0.5%FS, output signal 4-20mA and strong anti-interference capability. DC voltage sensor is mainly used for voltage isolation and monitoring of all kinds of instruments.

DC voltage transducer has a measuring range from DC 10mV/50mV/75mV/5V/150V/300V/500V to 1000V. It's also an isolated voltage transducer with special isolation module, supply voltage DC 9-36V, accuracy 0.2%FS and output signal 0-20mA/4-20mA. DC voltage sensor is widely used for voltage isolated measuring and control, such as all the instruments, medical equipment, etc.

DC voltage transducer with supply voltage DC 9-36V is a special voltage sensor for bidirectional voltage tracking. The measuring range of input voltage is from ±10mV, ±50mV, ±100V, ±200V, ±500V to ±1000V. The tracking output signal can be DC ±5V, ±10V.