150mm Magnetostrictive Level Sensor for injection machine

$929.86

Magnetostrictive liquid level sensor for injection machine, high precision, no temperature drift, anti-jamming performance, long life, high temperature resistance, corrosion resistance, high pressure resistant.

SKU: ATO-MSL-0150

Qty:

30-day Returns

Delivery date: 6-12 days

Overview

Magnetostrictive level sensor with measuring range 150mm is used for the liquid level preset and feedback, such as the liquid level of injection machine hydro-cylinder. Magnetostrictive sensors also can be used in most industrial automation systems.

Specification:

Basics	Model	ATO-MSL-0150
	Measuring range	0~150 mm
	Shipping weight	1.3 kg
	Length	349.3 mm
	Diameter	50 mm
Technical parameters	Linearity	≤0.03%FS
	Repeatability	≤0.003%FS
	Resolution ratio	≤0.001%FS
	Hysteresis	≤0.001%FS
	Working Voltage	24V /12V DC
	Working current	Voltage /digital output type≤16mA; Current output type≤35mA
	Output method	0~5V / 0~10V / 4~20mA / 0-20mA RS485 binary digital signal / SSI gray code signal
	Product type	Normal type; Explosion-proof type; Anti-corrosion type
	Measuring rod material	0Cr18Ni9 (304) or 316L stainless steel (secial custom-made)
	Measuring rod diameter	Ф10mm
	Electronic bin material	1Cr18Ni9 (304)
		304 and PTFE casing outside (Anti-corrosion type, special custom-made)
		1Cr18Ni9Ti and protection cover outside (Anti-corrosion type, special custom-made)
	Connecting screw thread	M18×1.5; M20×1.5; 3/4-16UNF
	Type of lead wire	PVC shielded cable; aviation plug (not applicable to explosion-proof type)
	Measuring rod pressure	40MPa, 70MPa (Explosion-proof type)
	Temperature	T1: 0~+ 70℃, T2: -25~+80℃, T3: -40~+120℃
	Buffer area	Front-end of buffer 50.8mm (electronic bin), the end of the buffer 63.5mm (the buffer area can be custom-made)
	Vibration	100g, IEC standards 68-2-715g /10-2000Hz IEC standards 68-2-6
	Protection Class	IP67
	Explosion-proof level	Explosion-proof type: EXd II BT5

Installation diagram (unit: mm):
magnetostrictive level sensor PG7 connection

Tips: Power supply of magnetostrictive sensor
As for power supply of the sensor, in case of power undercapacity of the magnetostrictive displacement sensor, following situation will be caused: Due to the movement of glue-smelting, the display transformation of the clamping sensor will be caused. Meanwhile, due to the movement of clamping, display fluctuation of sensor for injection will be caused, and measuring error will be large. However, such situation will more easily emerge if the driving power of magnetic valve and supply power of magnetostrictive sensor is commonly used.