2 Axis Digital Readout, DRO for Mills, Lathes

4.7 out of 5 based on 4 reviews | Write a review

$249.86

High precision digital readout 2 axis, resolution 0.1um, 0.2um, 0.5um, 1um, 5um, 10um or 50um, input voltage 90-240V. DRO digital readout can be connected with linear scale or encoder to meet the processing and measurement requirements of various machine tools, such as milling machine, lathes and table saw fence.

SKU: ATO-DR-WE68002

Qty:

30-day Returns

Free Shipping

Delivery date: 6-12 days

Overview
Document

2 axis digital display scale 0.1 um, 0.5 um, 5 um, 10um, 50um, for milling machine, lathes, and surface grinders. Avaliable length to 900mm, input signal TTL.
After purchasing a ATO DRO digital readout, you can buy a linear scale for milling machine, lathes or table saw fence.

Features

1. Professional design of independent power supply, power supply anti-interference ability and signal anti-interference ability to achieve more than 2200V.
2. Quality and durable light touch button panel with sound prompt for key operation.
3. Without battery, it can remember the coordinate value of the position when the power is lost after power failure.
4. DRO digital readout can be connected to grating ruler or encoder, which can meet the processing test of all kinds of machine tools.
5. Wide voltage input range, input voltage AC90V-AC240V.

Specifications

Model				ATO-DR-WE68002
Axis number				2 Axis
Resolution				0.05μm, 0.1μm, 0.2μm, 0.5μm, 1μm, 2μm, 5μm, 10μm, 20μm, 50μm
Input Signal				TTL, Frequency < 2MHZ, Current > 1mA
Input Voltage Range				90 VAC-240V AC
Power				Less than 15W
Max Measuring Length				900mm
Frequency				50 Hz - 60 Hz
Anti Interference Capability				Over 2200V
Dimension				296mm x 184mm x 44mm

Dimension (unit: mm)

ATO-WE6800 Digital Readout User Manual

Existing reviews of 2 Axis Digital Readout, DRO for Mills, Lathes

Great device easy to setup

It was very easy to install and calibrate. The instructions are easy to follow. Good

From: Jacob | Date: 01/12/2023

Was this review helpful? Yes No (0/0)

I'm really happy with it after using it.

So far, I am very happy with this DRO. The installation went very smoothly . If I needed a second one I would not hesitate to reorder this one.

From: Maël | Date: 29/04/2022

Was this review helpful? Yes No (0/0)

Thank you very much for the seller's service

Although I ordered a wrong size before, I am thankful that the customer service reminded me, in order to save a shipping cost, I now received the correct digital readout, which is not complicated to install on the milling machine, and the hardware is complete and works well and very accurate.

From: Ignacio | Date: 29/04/2022

Was this review helpful? Yes No (0/0)

Accurate as described

After using this 2 Axis digital readout for 6 weeks, so far this set works very well, and represents excellent value. Surprised at how accurate it is. I am happy with this purchase.

From: Amazon | Date: 12/07/2021

Was this review helpful? Yes No (0/0)

Load more reviews...

Write your review for 2 Axis Digital Readout, DRO for Mills, Lathes