600W Wind Turbine MPPT Charge Controller, 12V/24V

5 out of 5 based on 2 reviews | Write a review

$104.61

Wind turbine mppt charge controller for wind power system, 12V/24V (auto), wind turbine rate power 500W, waterproof and dustproof design, IP67, Intelligent protection function, strong reliability, value for money.

SKU: ATO-WTCMPPT-600

Qty:

30-day Returns

Free Shipping

Delivery date: 6-12 days

Overview

Buy low price wind generator charge controller, mppt control, 500 watt, rated voltage can choose 12 volt or 24 volt, diode display, save money by selling directly to manufacturers.

Note:

The controller needs to be selected according to the power of the wind turbine and the battery voltage.

Max voltage setup: 12.4V for 12V batteries, 29V for 24V batteries, and 58 for 48V batteries.

Specification:

Model	ATO-WTCMPPT-600
Rated Voltage	12V/24V (Automatic recognition voltage) ATO recommends the same generator voltage as the battery voltage
Wind Generator Rated Power	600W
Protection	Overcharge, overdischarge, reverse connnection of batteries,overloading, lighting, current control, automatic braking
Function	MPPT Charging
Unloading Way	PWM Electrodeless and noiseless unloading
Working Temperature	-20~+60°C 35~85%RH
Dimension	1008015mm
Net Weight	0.4kg

Features
1. High quality technical components ensure the stability and reliability of the wind turbine controller.
2. Waterproof and dustproof, the controller can be used in various outdoor environments.
3. Voltage/current control charging ensures that the battery is always charged.
4. The MPPT charging effect is to collect electrical energy from the generator and charge the battery.
5. Use PWM to unload excess electron energy to protect the battery and ensure the safety of the wind generator.

Wind Power System Connection Diagram

Existing reviews of 600W Wind Turbine MPPT Charge Controller, 12V/24V

Do you have a suitable charge controller for my application?

I am looking for a charge controller for my wind turbine. The turbine puts out 13 volts DC and 1 amp at a 10 mph wind and all the way up to 48 volts and 10 amps at a 40 mph wind.
Obviously, the 48 volt/10 amp would be a lot more productive if adjusted to say 12 volt and 40 amps. Do you have a charge controller that would work for this application?
My battery bank is 12 volts.

From: abner | Date: 01/08/2023

Was this review helpful? Yes No (0/0)

ATO Responded

We recommend 600W Wind Turbine MPPT Charge Controller, SKU: ATO-WTCMPPT-600, rated voltage 12V, maximum current 40A. This charge controller can meet your needs. You can tell us what is the power of your wind turbine in W, in order to give you the correct advice, thank you for your understanding.

Great choice

My solar panel is often exposed to bad weather. I believe the MPPT wind turbine charge controller is my best choice. I did not hesitate to buy a 12V MPPT controller. It is really great and can adjust the temperature and compensate for the voltage change.

From: Jim | Date: 16/02/2020

Was this review helpful? Yes No (0/0)

Load more reviews...

Write your review for 600W Wind Turbine MPPT Charge Controller, 12V/24V