Concrete Vibrator Motors

The concrete vibrator housing is made of cast aluminum, strong and durable, good, improve work efficiency, high quality comfortable handle for easy operation, one-touch switch design, concrete vibration motor power options of 1 kW, 1.2 kW, 1.5 kW and 3 kW.

How to install concrete vibrator?

The installation surface of the concrete vibrator must be flat, and the flatness tolerance of the installation surface should be less than 0.08mm to ensure that the internal stress generated by the vibration motor housing is minimized when the bolts are tightened, thereby avoiding footing break.

The vibration motor anchor bolts should be selected according to the hole diameter of high-strength bolts not lower than 8.8, nuts and flat washers of grade 8.

Why do you need a concrete vibrator motor?

In all fields, each specific tool will be designed and manufactured to meet a specific need. The construction world is no exception and each tool in this field has a specific need.

However, concrete vibration is one of the tools that meet the technical needs during the concrete placement process. The nature of concrete is such that when poured empty, it may mix with air due to its special paste-like state, or for any reason, air may be trapped beneath it.

When you cover a large surface with concrete, it is not at all surprising to encounter air bubbles trapped in the surface of the concrete. Of course, air bubbles do not only form on the surface, but can sometimes be seen in the intermediate layers as well.

Also, concrete vibrations help to release these trapped air bubbles, reach the concrete surface and detach completely.