Industrial Vibration Sensor, RS485/4-20mA/0-5V/0-10V

High performance, low power consumption, anti-interference and composite industrial vibration sensor. Adopting high-performance MEMS chip as the core, it ensures the accuracy, timeliness and safety during transmission of vibration velocity, vibration displacement and temperature measurement. It supports single-axis/three-axis simultaneous measurement and reaches IP67 protection level, which can be used for vibration detection and equipment health monitoring under harsh industrial conditions. A display resolution of up to 0.1 ensures fine data presentation, detects vibration changes in real time, and provides better maintenance solutions for machinery and equipment.

Specification

Feature

• Industrial vibration sensors use high-performance MEMS chips with high measurement accuracy and strong anti-interference capability.
• The vibration transmitter provides threaded mounting and magnetic suction mounting.
• It can measure single-axis and three-axis vibration speed, vibration displacement, motor surface temperature and other parameters.
• Support 10-30V DC wide voltage power supply, protection grade IP67, sensor support remote upgrade.

Dimension (unit: mm)

Wiring Instructions

1. There are certain specifications for wiring the 485 line field, please refer to the information package for details.
2. When the vibration sensor is connected to the 485 bus, make sure that the addresses of multiple devices are not duplicated.
3. The vibration sensor is available in m8*1.25*10 and m5*7 external threads, in addition to magnetic mounting.
4. Power supply and 485 signal:

Note: Wide voltage power supply input 10~30V is available. 485 signal line wiring, pay attention to the A/B lines should not be reversed, and the addresses of multiple devices on the bus should not be in conflict.

Application

Tips: The basics of this industrial vibration sensor

• Vibration sensors are available in single-axis and tri-axis options. Single-axis can measure vibration values and temperature, while tri-axis can measure vibration values, displacement and temperature values in the X-, Y- and Z-axes.
• Vibration sensor vibration value measurement range of 0-50mm / s, vibration displacement measurement range of 0-5000um, are supported by custom other range output, measurement accuracy of 1.5% FS, compared with products on the market, we can better meet your needs.
• Support RS485, analogue and other signals can be selected. The RS-485/analog style of this vibration transmitter is powered by external power supply.
• The mounting method has threaded, magnetic way to choose, which threaded mounting M8, M5 two kinds of specifications can be selected, if you need other sizes can contact customer service for free customisation.