Sensors

The efficient and intelligent rain and snow sensor is built for precise weather detection! This rain and snow sensor is equipped with RS485 and normally open relay output options for easy system integration and remote communication. The heating function is activated below 15°C, ensuring that the rain and snow sensor automatically heats up in cold or inclement weather, preventing the sensor from freezing.

The industrial grade rectangular fiber optic sensor combines advanced technology to provide efficient and stable inspection performance. Its diffuse reflective design and top induction mode, together with three inspection ranges (10mm, 15mm, 20mm), help you accomplish difficult inspection tasks with ease!

Rotary torque sensor input and output end use flange connection, capacity range from 20 Nm, 50 Nm, 100 Nm to 5000 Nm. It is non-contact without the use of the bearing, which is suitable for high speed rotating or requiring short axial occasion.

Rotary torque sensor can measure static torque and dynamic torque, non-contact with two shafts and shaft keys. The electrical signal of elastic shaft under torsion can be measured by providing power for the strain gauge bridge. Shaft torque sensors have a capacity range from 50 Nm, 100 Nm, 500 Nm to 50000 Nm.

The low-cost sanitary inductive conductivity sensor has a conductivity measurement range of 1ms/cm ~ 2000ms/cm, an accuracy of ±2% or ±1ms/cm, a built-in temperature probe, temperature compensation Pt1000, and strong anti-interference ability. The sanitary inductive electrical conductivity sensor can be widely used in monitoring the conductivity measurement of solutions such as thermal power, chemical industry, metallurgy, environmental protection, pharmaceuticals, biochemistry, food and tap water.

Temperature and humidity transmitter adopts digital temperature and humidity sensor AM2305, and converts the air temperature and humidity into 4-20mA standard signal. Industrial temperature and humidity transmitter has dustproof PC housing, metal filter screen, wide measuring range, high accuracy, anti-chemical pollution, excellent long-term stability and repeatability.

2 ton to 70 ton/100 ton load cell can bear both tension and compression, with high accuracy, strong overload capacity and protection class IP67. Wire ropes can be directly tied to the holes at both ends of the load cell. Tension load cell can be applied for crane, hook scale, port/terminal lifting equipment measurement and control.

Selling tension sensor for wire rope with three pulley. The tensile sensor can measure forces in the range of 0-100kg, with 5-15V operating voltage, 150% safe overload, 10KHz response frequency. The force sensor with built-in overload protection mechanism, high dynamic response frequency, suitable for all kinds of optical fibers, yarns, chemical fibers, metal wires, wires, cable wires, adhesive tapes, steel tapes tension measurement.

B type thermocouple assembles with protection head and corundum thermowell, should use wooden case for packing. Its thermo wire diameter is Ф0.5mm. B type thermocouple has the best performence and longest life. It can directly measure the temperature in the range of 0~1600 ℃ in various production processes.

Low price sold UV light intensity sensor, with a measurement range of 0-15mW/cm² (0-450 μW/cm²), operates within a wavelength range of 240-370nm. The UV sensor offers an accuracy of ±10% FS at 365nm under conditions of 60% relative humidity and 25°C. Powered by a DC supply of 10-30V (or 24V), this radiation sensor communicates via the 485 ModBus-RTU protocol. It has current (4-20mA) and voltage (0-5V/0-10V) output signals with a quick response time of 0.2 seconds.

DC voltage sensor with supply voltage DC 12V/15V/24V is a special voltage sensor for bidirectional voltage tracking. The measuring range of input voltage is from ±50mV, ±50V, ±200V, ±500V to ±1000V. The output signal can be DC 2.5±2.5V, 5±5V, 12±8mA, or 10±10mA.

Magnetostrictive displacement transducer for rolling mill, high precision, no temperature drift, anti-jamming performance, long life, high temperature resistance, corrosion resistance, high pressure resistant.

Magnetostrictive level transducer for lapping machine, high precision, no temperature drift, anti-jamming performance, long life, high temperature resistance, corrosion resistance, high pressure resistant.

Magnetostrictive linear displacement transducer with closed design, suitable for hydraulic cylinder with U-shaped earrings, high precision, non-contact, anti-interference ability, anti-fouling, oil-proof, waterproof, corrosion resistance.

Aluminum alloy rail type magnetostrictive displacement sensor for measuring linear displacement, external installation, compact structure, easy to use, good security, suitable for CNC machinery worked in large vibration.

High sensitive digital flow switch for air with 3/8 inch thread port size, measuring air and Nitrogen (N2), operating fluid temperature range from 0 to 50℃, selectable PNP or NPN signal output. This air flow switch comes with sensor for flow sensing to transmit data to the mainboard.

Good price for the latest 3D gyroscope sensor, output voltage 0-5V/0-10V, 0.5-4.5V optional, built-in high-performance digital signal processing chip, angular velocity output 1/2/3 axis optional (X/Y/Z axis). Can measure the fastest rotation speed of ±50°/S ~ ±300°/S, the use of MEMS manufacturing process, with waterproof, shockproof, anti-electromagnetic interference, low power consumption and other characteristics.

The magnetic compass sensor provides 0°-360° heading with high accuracy. Output options are RS232/RS485/TTL. This 6-axis digital compass sensor ensures reliable performance, featuring a wide tilt range and robust IP67 protection for demanding applications. Hard and soft magnetic calibration is supported for enhanced data accuracy.

This low-cost accelerometer and vibration sensor for sale supports 4-20mA signal output and is capable of accurately measuring vibration in the range of 10g/0-20mm/s. With a frequency response of 10-1000 Hz, it is capable of capturing vibration fluctuations in a variety of equipment. It supports an operating temperature range from -40°C to 85°C and has excellent anti-interference capability. The accelerometer sensor utilizes a DC24V±10% operating voltage and has a 2-wire connection to simplify installation.

Diaphragm pressure sensor can prevent blocking of viscous liquid. The internal ASICs convert the mV signal into a standard current (4-20mA/0-20mA), voltage (0-5V/1-5V/0-10V) or RS485 signal. Pressure sensor with stainless steel sealing structure has small size, light weight, high anti-vibration and anti-shock performance, measuring range 0~35MPa/ 0~350bar/ 0~5076psi, medium temperature -40~+60℃ (-40~+140℉), for water/viscous liquid pressure measurement.