Tag: air flow meter

In order to avoid stagnant materials in the pipeline sticking to the instrument and affecting its performance or possibly damaging it, the pipeline should be purged before the instrument is fitted. A magnetic filter should be fitted at the instrument's inlet if it is unavoidable. Prior to installation, it is also required to choose whether the instrument should be put horizontally or vertically. If the meter includes an LCD display, it is crucial to remember that the installation location should be as far away from direct sunlight as is practical to avoid shortening the LCD's service life. Let's follow ATO's example and investigate to learn more information!

As the name suggests, a flow meter is a professional automatic measuring device whose primary function is to measure the flow of fluids. These fluids can be liquids, gases, steam, mixed slurries, solid dust, etc. The flow meter is also referred to as a flowmeter since it not only quantifies the liquid's flow but also measures its instantaneous flow and total accumulated volume. With high precision, extended lifespan, simple operation and maintenance, and other features. Mainly used in industrial processes, energy measurement, environmental protection engineering, transportation, biotechnology, scientific experiments, marine meteorology, rivers and lakes, and other fields.

The general rule of choosing a flowmeter is, first and foremost, to thoroughly understand the structural principles of various flowmeters, fluid properties, and other aspects of knowledge, but also according to the specific circumstances of the site and look at the surrounding environmental conditions. This is done in order to ensure the accuracy of the flowmeter, stability at the same time, its widest range, and the minimum lower limit. Moreover, there are other issues. Let's keep up with ATO.com to find out more!

1. First, speak with the on-duty process operator.
2. Enter the building site after gathering your tools and wearing the appropriate safety gear.
3. Before the flow meter is put to use, confirm with the process operator that the flow meter flange is tight, the pressure gauge installation is complete, and the filter and pipeline venting are both closed. This will ensure that all venting points are closed.
4. To avoid fluid impact measurement parts being damaged by the incoming shaft sealing mechanism connection shaft damage, instruct the process operator to first open the flow meter export side valve and then then slowly open the inlet valve gate.
5. After putting the flow meter into normal operation, check to see if the instantaneous flow rate, pipeline pressure, and temperature all match the values on the flow meter nameplate. Before leaving the site, make sure the work is finished and that there are no leaks at the sealing locations.