Close
(0) Shopping cart
You have no items in your shopping cart.
Shopping Categories
    Filters
    Preferences
    Search
    RSS

    Tag: basics

    Lobe Pump Basics

    Lobe pump is a kind of industrial machinery, which mainly relies on the suction force generated by the rotor when it rotates, and then conveys all the materials that need to be conveyed by different meson to the discharge port by inhalation. Widely used with various industries, lobe pumps can shorten the life of lobe pumps if they are not operated in a standard way during use. The following explains the scope of application and features of the lobe pump as well as precautions for use.

    What is a Fiber Laser Marking Machine?

    Fiber laser marking machine is a laser with rare earth element doped glass fiber as the gain medium, fiber laser marking machine has become a hot topic in laser physics research in recent years. It is unanimously considered to be a new generation product that has the potential to fully replace solid-state lasers. Fiber laser marker can be developed on the basis of fiber amplifier: the high power density is easily formed in the fiber under the action of pump light, causing the laser working material laser energy level "particle number inversion", when properly added to the positive feedback loop (resonant cavity) can form the laser oscillation output.

    Axial Piston Pump: Definition and Application

    Piston pump from the structure is divided into single cylinder and multi cylinder, its characteristic is relatively high head. The flow rate of the piston pump is determined by the diameter of the pump cylinder, the piston stroke and the reciprocating times of the piston per minute. Piston pump is suitable for conveying oil emulsion without solid particles at room temperature. It is widely used for oil field, coal seam water injection, oil injection, oil production. Chamber press hydraulic press power pump, hydraulic sand, fertilizer plant transport ammonia liquid, etc. If the overcurrent component is stainless steel, corrosive liquid can be transported. In this article, we mainly introduce the definition and application of axial piston pump.

    Gloss Meter Basics

    Gloss is a physical quantity that evaluates the ability of a material surface to reflect light under a set of geometrically specified conditions, with directional selective reflection properties. The gloss we usually say refers to mirror gloss, so the gloss meter is sometimes called mirror gloss meter. Gloss is quite different from the machining industry's concept of finish or roughness, which is a continuation of the tiny unevenness on a material's surface.

    Mud Pump: Definition, Type and Advantage

    A mud pump is an essential piece of equipment for any oil and gas well. They are used to move drilling mud and other fluids needed during the drilling process. To choose the right mud pump for your well, you need to know an overview of mud pumps, such as what is a mud pump, what types and advantages are there. In this article, we will explain in detail about the mud pump. By the end of this article, you will clearly understand mud pump.

    Photoelectric Sensor Working Principle

    Photoelectric sensor is a general term for sensors that use light to detect objects. It is a device that emits light signals from the emitting part of the sensor and is reflected, blocked and absorbed by the detected object, and then detected by the receiving part and converted into corresponding electrical signals to achieve control. The photoelectric sensor consists of three parts, including transmitter, receiver and detection circuit.

    Colorimeter: Working Principle, Type and Application

    Colorimeter is also called the color meter, it is a kind of measuring instrument for material color characteristics, colorimeter is primarily used to measured the color of the material, color, color value measurement and analysis, if the colorimeter machine with computer, can improve the ability of analysis and processing of color, and the user can according to need to color from computer storage in the library to find out all kinds of data for color matching. In this article, we will introduce some basic about colorimeter.

    Thermal Overload Relay Basics

    Thermal overload relays are overload relays that apply the principle of current thermal effect and use electrical thermal bimetallic sheets as sensitive components. The electrical thermal bimetal sheet is made by heating and rolling two alloys with large difference in linear expansion coefficient. When heated, the bimetallic sheet bends from the high expansion layer to the low expansion layer. When the current is too large, the element acts due to "heat", so that its linked moving contact cuts off the power supply of the controlled circuit and the protected equipment.

    Diaphragm Pump Basics

    The Diaphragm pump, also known as control pump, is the main type of actuator. It changes the fluid flow with the help of power operation by receiving the control signal output by the adjustment control unit. The function of the diaphragm pump in the control process is to accept the control signal of the regulator or computer, change the flow rate of the adjusted medium, and maintain the adjusted parameters within the required range, so as to achieve the automation of the production process.

    Float Switch Basics

    The liquid level float switch is a liquid level control part with a simple structure and convenient use. It is equipped with a complex circuit and will not be disturbed. As long as the material is selected correctly, any liquid, pressure and temperature can be used. The float switch uses magnetic operation, no mechanical connection, simple and reliable operation. It has been widely used in the shipbuilding industry, generator equipment, petrochemical industry, food industry, water treatment equipment, dyeing and finishing industry, hydraulic machinery, etc. When the float switch is floated by the measured medium, the float drives the main body to move, and the magnet at the other end of the float will control the magnet on the switch action lever.

    Carbon Dioxide Sensor Basics: Working Principle, Maintenance and Advantages

    A carbon dioxide sensor or CO2 sensor is an instrument for the measurement of carbon dioxide gas. The most common principles for CO2 sensors are infrared gas sensors (NDIR) and chemical gas sensors. Measuring carbon dioxide is important in monitoring indoor air quality, the function of the lungs in the form of a capnograph device, and many industrial processes.

    Angle Seat Valve Basics: Components, Working Principle and Application

    Angle seat valves are 2-way, 2-position pneumatic piston valves. The piston pneumatic actuator provides linear motion to lift the seal from its seat. Because the seat is positioned at an angle, flow obstruction is minimal in the open position, resulting in excellent flow and low pressure losses. They are used to regulate the flow of liquids, gases, vapors, vacuum and even corrosive fluids. Angle seat valves can operate in high temperature and high viscosity media even at zero differential pressure. Rugged design makes these angle seat valves a best choice for harsh applications, and they have a very high cycle life.

    Electrolytic Capacitor Basics: Features, Functions and Advantages

    Electrolytic capacitor is a kind of capacitor, the metal foil is the positive electrode (aluminum or tantalum), the oxide film (aluminum oxide or tantalum pentoxide) that is close to the positive electrode is the dielectric, and the cathode is made of conductive material, electrolyte (the electrolyte can be liquid or Solid) and other materials together, because the electrolyte is the main part of the cathode, so the electrolytic capacitor is named. At the same time, the positive and negative electrolytic capacitors should not be wrongly connected.

    Explosion Proof Motor Bascis: Working Principe, Overhaul and Maintenance

    Explosion-proof motor is a kind of motor that can be used in flammable and explosive factories, and does not generate electric sparks during operation. In a very short period of time, a large amount of energy is released, high temperature is generated, and a large amount of gas is released, causing a high-pressure chemical reaction in the surrounding medium.

    Automatic Transfer Switch Basics: Funtions, Advantages and Selecting Principle

    An automatic transfer switch (ATS) is a device that automatically transfers a power supply from its primary source to a backup source when it senses a failure or outage in the primary source. The auto transfer switch has advantages of simple structure, easy & reliable operation, no noise, small impact, and long service life. Auto changeover switch is suitable for the illuminating circuits of commercial buildings, shopping mall, banks, and high-rise buildings where the power supply can not be cut off for a long time.

    Wind Meter Basics & Working Principle

    The wind meter (anemometer) is an instrument that measures the speed of wind. To determine wind speed, wind meters detect changes in certain physical properties of the fluid or the effect of the fluid on a mechanical device inserted into the airflow. There are many types of it. The most commonly used in meteorological stations is the wind cup anemometer. Its sensing part consists of three parabolic cone empty cups fixed on the bracket at 120°to each other. The concave surfaces of the empty cups are all in one direction. The entire induction part is installed on a vertical rotating shaft. Under the action of wind, the wind cup rotates around the shaft at speed proportional to the wind speed.

    In-wheel Hub Motor Basic Introduction

    As the name implies, hub motors place the electric motor in the front or rear wheel hub to help you move the bicycle down the road. A mid-motor puts an electric motor and gears right on the pedal shaft and boosts your pedal power directly, transmitting it through a chain or belt to the rear wheel.

    Brushed DC Motor Basics

    A brushed DC electric motor is a rotating electrical machine containing a brush device that converts electrical energy into mechanical energy or converts mechanical energy into electrical energy. The brush DC motor is the basis of all motors. It has the characteristics of fast starting, timely braking, smooth speed regulation in a wide range, and simple circuit control.

    Hydraulic Hand Pump Basics

    Hydraulic hand pumps play an important role in every industry that requires testing and calibration of pressure instruments such as pressure transmitters, gauges and switches. From energy production and healthcare to construction and wastewater management, they perform a very necessary function that ultimately helps keep our global economy running safely and efficiently. With such a wide range of uses, there isn't one hydraulic hand pump can meet the needs of all applications. So, in this article we'll learn about the basic functions of a hydraulic hand pump and outline some of its most important features.

    Pure Sine Wave Inverter Basic Introduction

    The output waveform of the pure sine wave power inverter is good, the distortion is very low, and its output waveform is basically consistent with the AC waveform of the mains grid. In fact, a good pure sine wave inverter provides a higher quality AC power than the grid. Pure sine wave inverter has little interference to radio, communication equipment and precision equipment, low noise and strong load adaptability. It has high efficiency and can meet all AC load applications.