Sensors

Compression force sensor, ring type for sale, with optional capacities of 0.5kN, 1kN, 2kN, 5kN, 10KN, 20kN, 50kN, 100kN, 200kN, has an output sensitivity of 1.0 ± 10% mV/V and a zero output of ±2%F.S. Made from stainless steel, the higher quality load cell has an impedance of 700Ω and insulation of ≥5000MΩ/100VDC. The operating voltage is 5-15V, and it performs within a temperature range of -20°C to 80°C. Hollow design, the main measurement of extrusion force, assembly interference detection and control of other industrial control force detection.

This tension force sensor with bearings is suitable for thin films and offers excellent durability and high accuracy performance. It offers a wide range of capacity options from 2.5kg to 50kg, accurate output sensitivity (1.0~2.0mV/V) for efficient data acquisition and feedback, and a response frequency of up to 1kHz for real-time monitoring of fast dynamic loads.

Higher quality tension force sensor for fiber and cable sold at a discount can measure tension of 10N, 20N, 30N, 50N, 100N, 200N, and 500N, with an output sensitivity of 1.0 ± 0.05 mV/V and a zero output accuracy of ±1% F.S. Force measuring load cells supports a maximum load of 300% R.C. and a cable pulling limit of 98N. Suitable for fiber optics, cables, and belts.

Flat plate force sensor for battery equipment with measuring range of 0-1/2/3/5 ton, has a sensitivity range of 1.5-2.0 mV/V and a non-linearity of ±0.5% F.S. The load cell has a full scale of ±0.5% F.S., with a drift of ±0.3% and zero output accuracy of ±1% F.S. It operates between -20°C and 80°C, with an input resistance of 750 ± 20 Ω and output resistance of 700 ± 5 Ω. Widely used in battery equipment force measurement, new energy projects and various engineering devices force measurement system.

Choose ATO grip force sensor which provides different range options from 0-10/20/100kg for hand strength test. Made of aluminum alloy with excellent anti-interference and durability, you will experience high precision and stable test performance.

AC voltage sensor is a 3 phase voltage sensor with a measuring range from AC 100V to 300V, supply voltage DC ±12V, output signal DC 0-5V, work temperature 0~50℃ and protection class IP20. Three phase voltage sensor can be used for electrical equipment, automation control and dispatching systems.

DC voltage sensors adopt photoelectric isolation principle, with measuring range from DC 100mV/1V/10V/50V to 70V, supply voltage DC 12V/24V, accuracy 0.5%FS, output signal 4-20mA and strong anti-interference capability. DC voltage sensor is mainly used for voltage isolation and monitoring of all kinds of instruments.

DC voltage transducer has a measuring range from DC 10mV/50mV/75mV/5V/150V/300V/500V to 1000V. It's also an isolated voltage transducer with special isolation module, supply voltage DC 9-36V, accuracy 0.2%FS and output signal 0-20mA/4-20mA. DC voltage sensor is widely used for voltage isolated measuring and control, such as all the instruments, medical equipment, etc.

DC voltage transducer with supply voltage DC 9-36V is a special voltage sensor for bidirectional voltage tracking. The measuring range of input voltage is from ±10mV, ±50mV, ±100V, ±200V, ±500V to ±1000V. The tracking output signal can be DC ±5V, ±10V.