Close
(0) Shopping cart
You have no items in your shopping cart.
Shopping Categories
    Filters
    Preferences
    Search

    Subminiature Load Cell, Button type, 3kg/5kg/10kg/20kg/50kg/100kg

    5 out of 5 based on 2 reviews | Write a review
    $123.81
    Subminiature load cell is a button type load cell with a diameter only 8mm. It is made of stainless steel, with protection class IP66, Φ2*2m cable. Subminiature load cell can be used for keyboard button hand-feeling test, force tester, automated assembly of new energy products and automotive products. It can be customized for the high-temperature working condition such as injection moulding, extrusion and other manufacturing processes.
    *
    SKU: ATO-LC-BU01
    30-day Returns
    Free Shipping
    Delivery date: 6-12 days

    Button load cells have capacity range from 3kg, 5kg, 10kg, 20kg, 30kg, 50kg to 100kg. Load cell capacity can be customized according to customer requirements.
    After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

    Specification

    Model ATO-LCBU-DYHW-108
    Shipping weight 1kg
    Capacity range * 0kg~100kg
    Accuracy 0.5%F.S (linearity + hysteresis + repeatability)
    Sensitivity 0.5-1.0mV/V (3-5kg), 1.0-1.5mV/V (10-100kg) (Low range variations may differ)
    Creep ±0.2%F.S/30min
    Zero output ±2%F.S
    Temperature effect on zero ±0.5%F.S/10℃
    Temperature effect on output ±0.5%F.S/10℃
    Operating temperature -20℃~+80℃
    Input impedance 1000Ω
    Output impedance 1000Ω
    Insulation resistance ≥2000MΩ
    Safety overload 150%F.S
    Bridge voltage (excitation voltage) DC 5-15V
    Material Stainless steel
    Protection class IP66
    Cable length 2m
    Wiring EXC+: Red, EXC-: Black, SIG+: Green, SIG-: White


    Feature

    Subminiature load cell 3kg to 100kg feature

    • Compact & Durable: Small, versatile design with a robust 17-4 PH stainless steel build for strength and longevity.
    • High Precision & Stability: Ensures accurate, consistent measurements with a reliable sensing chip.
    • Effortless Installation: Quick, hassle-free setup for seamless integration.
    • Resistant to Harsh Conditions: Withstands heat, wear, and environmental challenges for stable performance.
    • Long-lasting & Reliable: Provides durable and dependable operation over time.
    • Superior Wiring: 2.0mm diameter wires offer strong resistance to pulling and weathering, ensuring reliable signal transmission.

    Dimension (unit: mm)

    Subminiature load cell button type 3kg/5kg/20kg/50kg/100kg dimension

    Wiring Method

    Load cell wiring method

    Application

    Subminiature load cell 3kg to 100kg application

    Tips: Can a Subminiature Button Load Cell measure both compression and tension?

    No, these load cells are specifically designed for compression force measurement. If you need to measure both tension and compression, a different type of load cell, such as an S-type load cell, would be more suitable.

    How to calibrate the load cell transmitter/amplifier with a load cell?
    This video shows how to connect a load cell transmitter/amplifier to a load cell and how to calibrate the weighing system and adjust output signal (4~20mA).

    In this video, ATO will show you top ten most used sensors (sensing technologies).

    Calibrating a Weight Sensor Transmitter/Amplifier

    In this video, we show you how to perform the calibration process for a weight transmitter/signal amplifier provided by ATO.com. There are several basic parameters that need to be checked, adjusted, and verified for a successful calibration. During this process, we used a digital multimeter to ensure that the transmitter's output signal was exactly between 0 and 10V. We also walked you through how to set up the full range of equipment

    In this video, we've shown you how to calibrate the weight transmitter Model 610 by ATO using a compression load cell so that you can make sure you get the most accurate readings possible in your measurement.

    Existing reviews of Subminiature Load Cell, Button type, 3kg/5kg/10kg/20kg/50kg/100kg
    The reading of the load cell
    When we connect 2 load cell to display controller via junction box, what would be the reading refers to?
    From: Carolyn | Date: 09/06/2021
    Was this review helpful? Yes No (0/0)
    ATO Responded
    When two load cells are connected to the controller through a junction box, the weight value of the two load cells read by the controller is usually the actual weight value, not the sum of the weights measured by the sensor separately!
    Good subminiature load cell
    I need to be confirmed about your subminiature load cell and displacement sensor digtal display controllers supply voltage?
    From: Mary | Date: 25/04/2021
    Was this review helpful? Yes No (0/0)
    ATO Responded
    For both display panel meter, the input voltage is 100-240V AC, 50/60Hz.
    Load more reviews...
    Write your review for Subminiature Load Cell, Button type, 3kg/5kg/10kg/20kg/50kg/100kg
    • Only registered users can write reviews
    • Bad
    • Excellent
    Customers who bought this item also bought

    Digital Load Cell Amplifier, Output 4-20mA/0-10V/RS485

    $109.85
    SKU: ATO-LCTR-OAR
    High precision load cell amplifier has a 6 digit LED display, output signal 4-20mA/ 0-5V/ 0-10V/ RS485. There are 3 keys for parameter settings. Digital load cell amplifier can be calibrated on-line by its 3 keys. The setting parameters include zero, capacity, communication rate, division value, decimal digits, etc.

    Single Point Load Cell, 300g/1kg/3kg/ 10kg/60kg/100kg/200kg to 500kg

    $79.89
    SKU: ATO-LC-SP01
    Single point load cell is widely used for weighing scale or pricing scale. Single point load cell is suited to use in flat and low space, with parallel beam structure, good stability, good output symmetry, high accuracy, low temperature drift and overload protection.

    Tension and Compression Load Cell, 1 kg - 500 kg

    $137.98
    SKU: ATO-LC-TC01
    Tension and compression load cell can bear both tension and pressure, with good anti-eccentric load performance, low height, all sealed structure and complete specifications. Miniature load cell with optional capacity 1 kg/ 100kg/ 200 kg/ 300kg/ 500 kg is suited to use in restricted spaces, such as using in vehicle/test instrument/laminator measurement and control.

    Load Cell Transmitter, Output 0-5V/0-10V/4-20mA

    $81.27
    SKU: ATO-LCTR-OA
    Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.

    Load Cell Junction Box for Scales, 2/3/4/6/8/10 Inlets to 1 Outlet

    $66.67
    SKU: ATO-LCBOX-10I
    Multi-channel load cell junction box has 2/3/4/6/8/10 inlets and 1 outlet, aluminum alloy casing, good anti-interference, special for waterproof sealing joint, waterproof and dustproof rubber gasket for cover, easy to assemble and debug. Each channel can be adjusted balance to prevent damage to the sensor caused by inductive lightning and surge signals.