Test & Measurement

The laser digital tachometer with the highly sensitive non-contact sensor. It has a wide measuring range from 2.5 rpm up to 99,999 rpm and an accuracy of +/- 0.05%. The laser digital tachometer is available in both contact and non-contact measurement modes. It can be used to determine motor speed, linear speed or frequency, as well as to measure the speed of impellers, drums, and rotating shafts.

High quality coriolis mass flowmeter good price for sale, this flowmeter is a new type of flow measurement instrument developed according to coriolis working principle, support DN20 to DN150 pass size optional, can real-time monitor the flow rate, density and temperature, especially suitable for the accurate measurement of air, gas and liquid.

OCS crane scale has capacity from 2000kg (2 ton) / 3000kg (3 ton) / 5000kg (5 ton) / 10000kg (10 ton) to 20000kg (20 ton), accuracy standartd OIML class III, can be used for process weighing and trade weighing under crane or lifting equipment. Crane scale with one-piece load cell and cast aluminium housing has protection class IP54. Digital crane scale has optional weighing units kilograms (kg) or pounds (lbs) on panel. The continuous operation time of rechargeable battry is 50 hours at least.

The current clamp meter is a special mini clamp meter for AC/DC current measurement. The AC/DC current measuring range is 0-80A and NCV measuring range is AC 100~600V. Mini current clamp meter has high resolution 1mA and sampling rate 2.5 times/s. The maximum jaw opening size is 18mm.

Cheap price CT PT analyzer for current transformer testing, AC output voltage 220V, frequency 50Hz, measurement accuracy ±0.2%, with advanced design, stable and reliable product performance, complete functions, high degree of automation and high test efficiency.

CT PT analyzer for sale, low price, input voltage 110V or 220V, frequency 50Hz/60Hz, current transformer tester is used for the excitation characteristics, ratio, polarity, secondary winding resistance, ratio difference and angle difference of CT, PT electromagnetic units.

0-100A DC analog ammeter with affordable price for sale online. The base plate of analog amp meter uses PC flame-retardant plastic. Analog ammeter is widey used in electrical test, basic circuit analysis and battery monitoring. Small size and light weight, making analog ammeter easy to carry.

Good price analog 15-100A DC ammeter with 1.5% accuracy class for sale. The operating temperature of this analog ammeter between 0 ℃ to 55 ℃. Clear scale markings allow for more accurate readings, enabling precise measurement and reducing potential reading errors.

Cheap price milliamp meter with ABS material copper large screw for sale online. 0-100 mA DC milliamp meter adopts with a dust-productive back cover, safe and esthetic in use. Compact size milliammeter is often used in circuit design and analysis, laboratory experiments, and electronics testing.

High quality and reasonable price DC voltmeter for sale online. The shell of the analog voltmeter adopts with ABS flame-retardant plastic. Analog voltmeter gauge is stable and reliable. The measuring range of this analog voltmeter is 2V-200V. Analog DC voltmeter often used in the electronic industry and machinery industry.

Good price and high quality analog DC ampere meter for sale online. The overload ratio of this small analogue panel ammeter can be reach 100%. Damping time of panel ammeter is about 4s. Analog ammeter often used in electronic industry and machinery industry.

DC Current shunt is a device used in electrical circuits to measure or divert a portion of the current flowing through the main circuit. Current shunt is typically a low-resistance pathway connected in parallel to the main current path. Shunt current measurement is often used in telecommunication equipment, electric vehicle, aerospace, and charging station.

4 in 1 wall-mounted decibel level meter is used for detecting noise within 0 to 130 dBA. This sound level meter can detect and display noise, time, temperature & humidity at the same time, suitable for offices, factory workshops, schools and hospitals.

Desktop electrical conductivity meter for manual or automatic temperature compensation, with standard electrical grade: DJS-1VTC type conductive electrode (platinum black), has measuring range 0.00μS/cm~200mS/cm, power supply DC 9V, accuracy ±1.0%FS. It has a wide range of applications and can test the conductivity and TDS of aqueous solutions.

Dial gram force gauge is a precise tension meter for measuring push and pull forces, covering a 10g-500g or 0.1N-5N range. This portable analog force gauge checks switch contact pressure, spring force, and cable tension. It ensures product quality in electronics and manufacturing. A peak hold function captures maximum force readings. Tension tester is essential for quality control and R&D. High accuracy of ±2% provides reliable data for various applications.

Favorable price dial thickness gauge for sale, measuring range 0-10mm, throat depth 30mm, resolution 0.01mm with flat probe head for measuring leather, paper and film thickness.

The diaphragm pressure gauge, constructed from high-quality PP plastic. With a measurement range of 0.1-2.5 MPa and a 2.5 accuracy grade, this pressure gauge is designed to withstand strong acids, alkalis, and corrosive media. It features a durable threaded connection, a clear dial with dual-unit display, and excellent vibration resistance, making it ideal for applications in PCB etching machines, electroplating equipment, and chemical processing plants.

Economical diaphragm seal pressure gauge is for sale. It's made of stainless steel for corrosion resistance and high-pressure resistance, has an accuracy class of 2.5 and can display both bar and MPa units simultaneously. ATO diaphragm pressure gauge has multiple measurement range options, and is suitable for pressure measurement in various fields such as medical treatment, petrochemical industry, etc.

Low-priced capsule pressure gauge is for sale. Diaphragm type pressure gauge is made of stainless iron, with an accuracy class of 2.5 and a measuring range 0-10kPa. It is suitable for micro-pressure measurement in various industries such as mining, smelting, medical treatment, and food. Multiple measuring ranges are available.

Dielectric strength insulating oil tester for sale at economical price, it comes with 0 ~ 100 KV measuring range, 1 experimental cup and LCD display to measure the dielectric strength and quality of insulating oils. This transformer oil tester is commonly used in the electrical power industry to assess the condition of insulating oils used in transformers, circuit breakers, and other high-voltage equipment.