ATO series gas booster pump is a single-stage booster pump. In order to achieve the required outlet pressure, the input air pressure at the gas inlet needs to be pre pressurized to a certain extent. The pre boosting pressure varies with the maximum pressure, and the maximum pressure can be boosted to 80MPa. This series of pumps are made into double head pumps with larger output flow. The whole pump is made of aluminum alloy and stainless steel. The diameter of the driving piston of this series of pumps is 160mm, the driving air pressure is ≤ 8 bar, and the pump heads at both ends are equipped with exhaust cooling.
ATO air pressure booster with 07:1 ratio, 3- 56 bar gas inlet pressure, 56 bar maximum outlet gas pressure, 2-8 bar dirven air pressure, 556 L/min Maximum flow. Based on the air consumption of 1.0 M³/min when the driving pressure is 7
ATO air pressure booster with 10:1 ratio, 3.5-80 bar gas inlet pressure, 80 bar maximum outlet gas pressure, 2-8 bar dirven air pressure, 556 L/min Maximum flow. Based on the air consumption of 1.0 M³/min when the driving pressure is 7
ATO air pressure booster with 15:1 ratio, 5- 120 bar inlet pressure, 80 maximum outlet pressure. The driven air pressure is between 2 bar and 8 bar, the maximum driven air pressure is 10 bar. Air driven boosters are an efficient alternative instead of electrically driven products and can beused in explosion proof areas.
ATO air pressure booster with 25: 1 pressure boost ratio. The minimum gas inlet pressure is 10 bar, and the maximum inlet pressure is 200 bar. The maximum flow at driven air pressure of 20 bar is 396 L/min.
ATO air pressure booster with 60:1 ratio, 25- 420 bar inlet pressure, 480 maximum outlet pressure. Connection: gas inlet/ gas outlet (NPT thread) is 1/ 4/M 14* 1.5. Drive piston diameter is 160mm. ATO air pressure boosters are double acting, with single air driven heads type.