Blower has a promising future in the global market. ATO regenerative blower is distinguished from ordinary air blowers by its design, in which the bearings are made of special high-temperature resistant bearings, which can withstand twice the temperature of ordinary fans. It has been there a sharp increase in demand in recent years. At present, the production of regenerative blower as well as technology has been quite mature, continuing to evolve and upgrade. Regenerative blower is capable of providing a great range of cfm and pressure. It is important to know the principle of operation. The impeller of a regenerative blower has multiple blades on the edge of the impeller, and as the impeller rotates, air goes through the inlet side of the blower as it reaches the impeller. It will actually accelerate around the outside and between each blade it will actually regenerate over the next blade until it reaches the total differential pressure at the discharge. Due to the energy of multiple blades of the high-pressure fan rotation, the wind pressure is quickly superimposed, and a high-pressure or high suction force is formed. It is a pretty efficient way to generate pressure.