Fan Heater

ATO portable industrial fan heaters are perfect for heating up construction sites, factories, workshops, warehouses, garages, sheds, barns, and other spaces. We have two kinds of industrial fan heaters, one is 2kW to 15kW adjustable thermostat control electric fan heater with cooling fan design, stanless steel tube heating elements elements, different heating setting modes, turning the thermostat knob clockwise to adjust the temperature from high to low. And another is 20kW to 65kW diesel fan heater using diesel or kerosene fuel as power source, low consumption, IPX4 waterproof class, heating area up to 1300m³, equiped with rear handle and wheels for easy moving.

3 Types of Fan Heater:

Industrial electric fan heater. Such as 9kW fan heater general in workshop, indoor work commonly used a heating method, high power, large heating area, rapid heating, no noise, no oxygen consumption, is a convenient heating equipment. Voltage small power for 220V, high power for 380V, power generally ranging from 5KW to 30KW.

Industrial disel fan heater. Diesel heater fan can be used for industrial heating or drying, diesel or kerosene as fuel, burning to produce heat, to achieve the purpose of heating and drying, which is more burning diesel. Oil heater can be divided into two types of direct-fired and inter-fired, of which the direct-fired type is used more. Power 20-100kw ranging.

Industrial gas fan heater. Fuel for liquefied petroleum gas, through the combustion of heat generated by the wind volume non-stop delivery of hot air, the outlet temperature is higher, suitable for a larger area heating or drying, etc. Types are ordinary removable, but also umbrella-shaped.

How Does a Fan Heater Work?

Industrial fan heater is a device that can emit warm air. Generally speaking, the temperature is about 70-300 °C. It contains three parts: Heating, blowing, temperature and blowing control and protection. The working principle is the same as that of the fuel oil model. The gas industrial heater also has a combustion chamber, ignition system, gas supply system, motor, safety device, etc. open the device on control board, and then the fan is turned on for prepurge. The equipment then informs the ignition transformer to work and continues to discharge to produce sparks. At this time, it informs the safety valve to open. The gas passes through the safety valve and enters the combustion chamber. After touching the spark, it burns. Photoelectric induction performs internal flame induction in the machine to sense the flame combustion state. After the whole work is completed.

All gas industrial heater products are equipped with photoelectric sensor protection, temperature overheat protection, power cut off gas source protection and other devices, photoelectric sensor is in charge of detecting the flame inside the combustion chamber, when it feels flameless combustion is happening, it will automatically cut off the gas source for preventing gas leak. Temperature overheating device is responsible for detecting the working temperature inside the machine, when the internal temperature exceeds the dangerous value, the equipment will immediately stop burning, but the fan will continue to dissipate heat to protect the service life of the equipment, also accidental power failure equipment will automatically cut off the gas source to ensure that the gas is not leaked. These devices ensure the safe operation of the equipment during work.

Fan Heater Safety Use Notice:

• Industrial fan heater cannot be put right under wall socket.
• Do not connect automatically turn on and off timers or other devices with automatic functions.
• Portable fan heater cannot be put in the places or storerooms where include flammable liquid or gas.
• If you want to use an extension cord, it must be as short as possible and always be able to fully expand.
• The power socket of industrial electric fan heater cannot connect other devices.
• Industrial fan heater cannot directly used in bathroom, toilet or around swimming pool.
• If the power core of industrial fan heater is damaged, it must go to the manufacturer or repair department to repair.
• Make sure diesel fan heater is supervised when in use, and it must be away from children and animals.
• Do not place the electrical appliance in a moving vehicle or some places where it is easy to fall.
• When the 2kW fan heater has not been used for long, it should unplug electrical appliances.
• Power supply is waterproof, but for preventing possible electric shock or leakage, do not operate the 9 kW fan heater or appliances with wet hands.
• Do not treat electrical appliances as unsorted municipal waste, and use separate collection facilities. If electrical appliances are disposed of in landfills or dumps, harmful substances will penetrate into the groundwater and endanger your health.