Sensors

Factory price 3-phase AC voltage transducer for sale online. The response time of the three-phase AC voltage transducer is less than 400ms. It supports 0-120V/0-300V/0-450V/0-600V AC voltage input, and provides 0-1mA/0-10mA/0-20mA/4-20mA/0-10V/0-5V/1-5V output.

High quality 10 bit rotary encoder online for sale. Multi-turn absolute encoder with RS485/ CAN two communication interfaces for selection, working voltage 5V/ 24V are optional, 10 bit absolute encoder with natural binary code encoded output. The shaft encoder is widely used computer input devices such as optomechanical mice and trackballs, controlled stress rheometers and rotating radar platforms.

AC current sensor adopts electromagnetic isolation principle, small size, light weight, low price, fast response, high accuracy, good stability, 35mm/45mm/55mm hole diameter, and screws fixed installation. AC current sensor is widely used for AC current measurement of various occasions, especially for sine-wave ac current with power frequency 50Hz.

Lower cost analog output proximity sensor for sale online. The inductive sensor analog output with flush/ non-flush two installation types for selection, M12 connector/ 2m PVC cable two connection types are available. The sensor supports a variety of analog signal output methods, including 0–10V, 0–20mA, 4–20mA and 0–10V+0–20mA. M18 proximity sensor has advantages of light weight, small size and long service life.

Capacitive water level sensor with IP67 protection rating. The sheating material of capacitance probe level sensor is PBT. Capacitive level sensor can detect the non-metallic media in the container directly through the non-metallic tube wall. The switching frequency of this level sensor is 60 Hz. The ambient temperature range of this capacitive level sensor is -10℃ to 55℃, and the ambient humidity range is 35% to 95%RH.

Cheap price DC voltage transducer for sale online, the input voltage range of DC voltage transducer can be selected from DC 0-50V/150V/300V/400V/600V. The DC power consumption is about 3W, and the AC power consumption is about 4VA. The DC voltage transducer has a long life, high accuracy, and sensitive response, and is suitable for most environments.

Buy a GPS speed sensor for speedometer/odometer/tachograph online. Small speed measuring sensor adopts 0.2% high accuracy, shockproof and circuit protection design, supports negative and positive pulse output up to 50,000 pulses/km, can be used in strong wind or heavy rain.

High temperature limit switch adopts one roller lever with a radius of 38mm and fully enclosed 1NO + 1NC contact switches casting from high temperature resistant material, can be used in the environment temperature 350℃ (622℉) and without being damaged by oxidation or pollution. The default rated current and voltage is 5A/220VAC. Customizable voltage is DC 0-220V and AC 0-480V. Roller lever limit switch has automatic reset function. It is usually used for the machinery operating at a low speed.

Good price inclinometer sensor is designed for high accuracy industrial measurement. Single axis/dual axis tilt sensor comes with high precision, output signal CAN 2.0A or CAN 2.0B, measuring range ±15°/±45°/±60°/±180°, maximum absolute accuracy 0.008°, and wide voltage input DC 9-36V.

Single axis or dual axis inclinometer sensor for sale. High precision tilt switch comes with output signal Modbus, optional measuring range ±10°/±30°/±60°/±90°, output interface RS232, RS485, RS232, UART TTL, absolute accuracy 0.05°, power supply input 9-36V.

Indoor air quality sensor low price for sale, measures temperature -20°C~+60°C, humidity 0~100% RH, PM2.5 0-1000ug/m3, PM10 0-2000ug/m3, H2S 0~100ppm, CO2 0~2000ppm, illumination 0-200Klux. Air particle sensor uses RS485 communication method, 12-24VDC power supply. The air quality sensor is suitable for a wide range of indoor locations, homes, schools, underground garages, hospitals and more.

High quality inductive proximity sensor at affordable price, ring type proximity sensor with 10mm diameter, NPN/ PNP/ 2 wire three output types for selection, embedded type installation, > 20MΩ insulation resistance and repeated accuracy ≤5%. The inductive ring sensor uses ABS plastic shell material, has IP67 protection level, and can operate stably in harsh industrial environments.

Factory price inductive proximity sensor online for sale, with 6mm ring diameter, DC24V/ AC110V/ AC230V output voltage can be chosen, NPN/ PNP/ 2 wire three output types for selection. The ring inductive proximity sensor has IP67 protection level, and is dustproof and waterproof. Ring type proximity sensor is generally used to detect small objects, such as blanking detection, small steel balls, small springs, small rivets, metal wire breakage, wire breakage detection.

The industrial digital dew point transmitter provides reliable -60~90°C monitoring for industrial process control. This online type sensor delivers ±2°C Td accuracy with excellent long-term stability. Flexible RS485 and analog outputs support various control system integrations. Factory-calibrated dew point temperature transmitter offers dependable operation for compressed air systems and industrial gas processing applications.

The infrared through beam photoelectric sensor delivers precise and rapid detection with a 1.5 m sensing range, 940 nm infrared light source, and response time under 1 ms. Featuring a durable PC housing and IP54 protection, mini photoelectric sensor ensures stable operation in demanding environments such as chemical processing, production lines, textile manufacturing, CNC machinery, and escalator automation systems.

Inline conductivity sensors/probes for sale, with protection level up to IP68, are designed for liquid conductivity monitoring. Signal output is optional RS485/4-20mA, with a range of 0~5000μs/cm, which can be easily integrated into different devices. The operating temperature of the inline electrical conductivity sensor/probe for liquid is 0~65℃, and the accuracy level is ±1.5%F.S. and ±0.3℃, which is suitable for the measurement needs of different liquids.

This label gap sensor is designed for high-speed, precise detection of non-transparent adhesive labels in packaging and labeling applications. Gap sensor for label features a rapid response time of 0.1ms and a maximum switching frequency of 10kHz, ensuring reliable performance even at high line speeds. The gap sensor for label helping to minimize missed labels and enhance production efficiency.

Cost-effective laser distance sensor has 85mm measuring center distance. High accuracy laser distance sensor has power supply 10-30V DC/ 12-24V DC, protection class IP67, 30um@85mm resolution, laser spot diameter Φ0.5@85mm and CE, UL, CCC, ROHS certificates .

M12 laser sensor for displacement/rpm measurement adopts diffuse reflection or through beam detection mode. The through beam laser sensor has the detection range of 100m, and the diffuse reflection laser sensor has 200mm detection range. High accuracy laser sensor has power supply 10-30VDC, protection class IP67, laser spot size 4mm and stainless steel detection head with thread size M12*1mm.

The 2-wire magnetic sensors of the cylinder is provided to the controller as a position signal. The controller detects the presence of the magnetic switch signal, and realizes position control, stop and start of the cylinder. Its maximum contact capacity is 10 W, and the magnetic switch of the cylinder responds very Sensitive, the cylinder sensor is your best choice.