Transmission & Actuator

8mm Needle Roller Bearing, Drawn Cup Type

$35.23

SKU: ATO-NRB-8

Cheap price needle roller bearing with 8mm inner diameter for sale online. The drawn cup needle roller bearing with 14mm outer diameter and width of 10mm. HK 0810 roller bearing punched with the steel sheet.

90 mm Strain Wave Harmonic Drive Gearbox, Ratio 50~100

$427.72

SKU: ATO-HD-90

Get the best 90mm strain wave gear from a reliable harmonic drive company. It is a high torque harmonic gearing with a 50 or 100 gear ratio. The harmonic drive gearbox provides high transmission accuracy and supports a single-stage high reduction ratio with low inertia, used for industrial robots, CNC equipment, medical instruments, and the military industry.

93 mm Strain Wave Harmonic Drive Gearbox, Ratio 30~100

$541.19

SKU: ATO-HD-93

Factory price 93 mm harmonic drive gearbox for sale online. 30/50/80/100 gear ratios are available. Small strain wave gearbox can provide harmonic gear reduction, but can also be used to increase rotation speed, used for industrial robots, CNC equipment, medical instruments, and the military industry.

Acetylene Regulator, Inlet 200 psi, Outlet 20 psi

$116.97

SKU: ATO-PR-W0222

Single stage two gauge acetylene regulator for sale, rated 200 psi inlet pressure, 20 psi outlet pressure, 5 m3/h flow rate, designed for daily use, stable operating pressure, independent of inlet pressure and flow rate fluctuations.

Air Hose Fitting, 90 Degree, 16mm

$19.89

SKU: ATO-AHF-PV16

90 Degree elbow air hose fitting OD 16mm, made of nickel plated brass, the inner wall is thickened to withstand high pressure and high temperature without deformation, used to connect fluids such as compressed gas and vacuum.

Argon Regulator with Flow Meter

$109.86

SKU: ATO-PR-W0323

Argon gas regulator with flow meter, rated output pressure 145~3625 psi, energy saving and stable, suitable for intermittent short welding, plastic adjustment knob, easy to control air pressure, argon pressure regulator body made of high quality copper, can withstand harsh environments.

Ball Screw Bearing, Diameter 15mm

$195.89

SKU: ATO-BSB-AK

Sell low price ball screw bearing, shaft diameter 15mm, 20mm, or 25mm, the material is made of high-quality bearing steel, with strong load-bearing capacity, accuracy class C5. Widely used in the aerospace industry, actuators used in antennas, valve switch equipment, etc.

Ball Screw Bearing, Diameter 25mm

$132.89

SKU: ATO-BSB-AF

Small size ball screw support bearing diameter 25mm, high-precision miniature angular contact bearings have stable rotation performance, ball screw bearing internal bearing is closed with a special closed ring and has a long service life time.

Brass Air Vent Plug, 1/8, 1/4, 1/2, 3/8 NPT

$11.61

SKU: ATO-VP-HT

Buy a 1/8, 1/4, 1/2, or 3/8 NPT air vent plug online. Made of brass nickel-plated materials, it is waterproof, dust-proof, oil-proof, and acid- and alkali-resistant. The protection level can reach IP67 or above (customized is supported). G thread vent plug is also available.

Brass Pressure Relief Valve, DN15-DN50

$103.65

SKU: ATO-BPRV-4502

Adopt high performance brass pressure relief valve for water, oil and gas media, provide DN15/20/25/32/40/50 specifications for optional, with spring-loaded safety valve structure, manual operation, easy installation.

Cable Drag Chain, 10 x 20mm

$99.72

SKU: ATO-CDC-T10

CNC cable drag chain for sale, plastic material, factory direct price, inner height 10mm, inner width 10mm, 15mm, 20mm or 30mm. Easy installation, low operating noise.

CO2 Regulator for Grow Room

$146.98

SKU: ATO-PR-W0326

Low price double gauge co2 regulator for sale, plastic flow adjustment knob, accurate adjustment, stable pressure and no air leakage, suitable for indoor hydroponics, grow rooms, grow tents and warm houses to ensure optimal plant growth.

Covered Pneumatic Foot Pedal, 5 Way 2 Position

$39.37

SKU: ATO-PFD-4F2108G

High efficiency pneumatic foot pedal with high strength plastic protective cover, wear resistant and pressure resistant, 5 way 2 position pneumatic foot pedal valve made of aluminum alloy, stylish appearance, anti-corrosion, anti-oxidation.

Curved Jaw Coupling, 105 x 140mm

$734.86

SKU: ATO-SC-GFCG-105140

This curved jaw coupling comes with a 105mm outer diameter and 140mm length, it's engineered for high-torque applications. With a substantial 720 Nm torque rating and an allowable speed of 5800 RPM, this rigid coupling is perfect for demanding applications.

Curved Jaw Coupling, 120 x 160mm

$789.37

SKU: ATO-SC-GFCG-120160

Curved Jaw Coupling featuring an outer diameter of 120mm and a length of 160mm, rated torque of 1040 Nm and a maximum allowable speed of 5200 RPM. ATO curved jaw coupling is highly versatile and compatible with a wide range of shaft sizes and types.

Curved Jaw Coupling, 20 x 30mm

$89.98

SKU: ATO-SC-GFCG-2030

Curved jaw coupling for CNC machine tools, Φd20mm, length 30mm, bore 4mm to 10mm, plum-blossom coupling with simple structure and strong bearing capacity, suitable for medium and high-speed occasions.

Curved Jaw Coupling, 25 x 34mm

$89.99

SKU: ATO-SC-GFCG-2534

Professional curved jaw coupling for sale, diameter x length (25mm x 34mm), with stable performance, rigid plum jaw coupling is widely used to connect CNC machine tools, stepper motors, water pumps, fans, etc.

Curved Jaw Coupling, 30 x 35mm

$167.89

SKU: ATO-SC-GFCG-3035

Curved jaw coupling for CNC machine, bore 8mm to 19mm, diameter 30mm, length 35mm, shaft sleeve made of stainless steel, good corrosion resistance, clamp coupling has large axial, radial, and angular compensation capabilities and is suitable for large torque transmission.

Curved Jaw Coupling, 35 x 50mm

$178.96

SKU: ATO-SC-GFCG-3550

Curved jaw coupling size 35mm x 50mm, bore 8mm to 19mm, large bearing capacity, long service life, compensation for the relative offset of the two axes, shock absorption, wear resistance, and buffering performance.

Curved Jaw Coupling, 40 x 55mm

$179.86

SKU: ATO-SC-GFCG-4055

Affordable price curved jaw coupling for sale, diameter 40mm, length 55mm, bore size 8mm to 24mm, has good wear resistance, corrosion resistance, and electrical insulation, which can reduce the wear of shaft components.