How to Maintain Rubber Sheet?

What is the maintenance method of rubber sheet? Rubber plate itself has a certain weight, has a good grip, can be directly attached to the ground, generally do not need glue fixed. The joints can be cut into 45 degrees of slope with wallpaper knife. No obvious gap can be guaranteed through alignment and joint stitching, which does not affect the beauty and normal use of insulation glue.

If the appearance requirements are strict, welding gun can be used to connect. ATO shop will introduce the maintenance methods of rubber sheet in detail.

• Insulation pad should avoid direct sunlight or sharp metal scratches, storage should avoid and heat source distance too close, to prevent worsening aging deterioration, so as to reduce the insulation performance.
• In use, the ground should be flat, no sharp hard objects. And in the process of use found cracks, scratches, thickness reduction and other insufficient to ensure the insulation performance, should be replaced in time.
• The insulating rubber pad should be kept dry and clean, and should be prevented from contacting with acid, alkali and various oils to avoid aging, cracking or stickiness after corrosion, thus reducing the insulation performance.
• Different types and specifications of layers of insulation rubber sheet do not mix, joint to use glue bonding method.

In the process of use, the ground should be flat, no sharp hard objects, rubber plate laying, rubber plate joint should be smooth, there will be no crimping phenomenon, to prevent operators from falling during equipment inspection or parking operations. Such as cracks, scratches, thinning thickness is not enough to ensure the insulation performance, should be replaced 5 mm rubber sheet in time, avoid direct sunlight or metal sharp piercing, storage to avoid close to the heat source, so as not to occur aging and deterioration, reduce the insulation performance.

The insulating rubber sheet should be kept dry and clean. Pay attention to preventing contact with acid, alkali and various oil substances, so as to avoid aging, cracking or corrosion after insulation or viscosity reduction. The 6 mm rubber sheet should be cleaned with soap and dried with talcum powder at a temperature of not more than 65 ℃. If the insulating pad is coated with tar and paint, immediately wipe the contaminated area with an appropriate solvent. Avoid excessive use of solvent gasoline, paraffin and pure alcohol for cleaning, which can be used to clean tar and paint. Wet rubber sheet should be dried accordingly, drying temperature should not exceed 65 ℃.

In addition, the rubber packing sheet itself has a certain weight, has a good grip, can be directly affixed to the ground, generally without glue fixed; The joints can be cut by wallpaper knife at a 45 degree angle. There is no obvious gap between the adjustment and the joints, which does not affect the beauty and normal use of the insulation pad. If the appearance requirements are strict, welding gun can be used to connect.