How to Use UPS for Computer?
What is a UPS?
UPS is an uninterruptible power supply with energy storage device. It is mainly used to provide uninterrupted power supply to some devices that require high power stability. When the mains input is normal, the UPS will stabilize the mains and supply it to the load. At this time, the UPS is an AC voltage stabilizer, and it also charges the battery inside the machine; when the mains is interrupted (accidental power failure) When the UPS is switched on, the UPS will immediately supply 220V AC power to the load by switching the DC power of the battery to the load, so that the load can maintain normal operation and protect the software and hardware of the load from damage. UPS devices usually provide protection against overvoltage or undervoltage.
Sudden power outage, how to use the UPS?
When you are shopping on your computer, Sudden power outage, Is there any way to avoid computer damage caused by sudden power failure? It is recommended to use ATO UPS.
When encountering a power failure, ATO UPS can switch the mains power to backup battery power supply within 8ms.
This is a 1000VA/600W ATO UPS.
This is everything in the box package.
Battery packaging shell.
There are two 12V 38Ah batteries inside.
Place them in the battery box.
Connect two batteries in parallel, and lead the positive and negative electrodes out.
Connect the AC power cord at the input end of the UPS.
Connect the + and-of the battery pack to the + and-of the UPS chassis.
Connect the computer's power supply to the output end of the UPS.
Input AC power to the UPS.
Turn on the power, the left one is the input AC voltage, and the right one is the UPS output voltage.
At this point, we can surf the Internet without any worries.
When UPS loses utility power, it will immediately switch to backup power supply.
And it will sound an alarm while switching.
As you can see, the computer did not immediately go black due to power failure.
We can calmly close the computer program, and then shut down the computer.
In this way, your computer will not be damaged due to power failure.
ATO UPS for computer emergency power, 600VA, 1000VA, 1500VA, 3000VA, 10kVA, etc. Voltage 120V/220V or other customized voltage. Transfer time 1~10ms. If you want to read more about how to use ups, please watch the video:
