Transmission & Actuator

Magnetic Powder Clutch, Hollow Shaft, 6Nm-200Nm

$415.56

SKU: ATO-POC

High quality magnatic particle clutch rated speed with 1800rpm, rated torque 6Nm, 15Nm, 25Nm, 50Nm, 100Nm, 200Nm are optional, DC voltage 24V. Hollow shaft, quick response, used for tension control, torque limit and overload protection.

Mini Linear Actuator, 12V/24V, 800N, 150mm Stroke

$132.89

SKU: ATO-LACTU-800

Miniature linear actuator is a powerful and reliable electric linear actuator for small to medium loads, max load up to 800N, 12V/24V, built-in limit switches, IP66 rated, rated speed at full load is 5mm/s, 50mm/100mm/150mm to 450mm stroke for selection.

Multistage Venturi Vacuum Generator

$87.72

SKU: ATO-MVG-Z1

Multistage venturi vacuum generator for sale, nozzle diameter 1.2/2.4mm, Rc 3/4" vacuum port, Rc 1/8" pressure supply port, max. vacuum pressure -84 kPa, max. operating pressure 0.7 MPa, structure of energy saving 3 stage diffuser.

Pneumatic Clutch, Shaft Mounted, 50Nm-400Nm

$342.78

SKU: ATO-PCB-NAC

Buy a pneumatic clutch for industrial applications, using a shaft mounted installation method, with static friction torque options of 50Nm, 100Nm, 200Nm, and 400Nm at 0.6MPa. The torque can be adjusted widely by adjusting the air pressure.

Pneumatic Foot Pedal with Lock, 5 Way 2 Position

$20.37

SKU: ATO-PFD-4F2108L

Locking 5 way 2 position pneumatic foot pedal, step down and lock it, then step on it again to open it, air outlet and air inlet holes 1/4 inch, allowing unidirectional control, suitable for controlling spring or load return cylinders.

Pneumatic Foot Pedal, 3 Way 2 Position, with Pneumatic Fitting

$27.97

SKU: ATO-PFD-FV3206

2 Position 3 way pneumatic foot pedal is a kind of foot-controlled reversing valve, which adopts copper core to reduce noise and reduce noise. It is small in size, beautiful in appearance, easy to operate and has a long service life.

Pneumatic Foot Pedal, 4 Way 2 Position

$25.96

SKU: ATO-PFD-FV420

Pneumatic foot pedal switch for air control and air direction change, 4 way 2 position, one in and two out, with one muffler, reinforcement spring made of thicker stainless steel, high strength.

Pneumatic Foot Pedal, 4 Way 2 Position, with Pneumatic Fitting

$27.39

SKU: ATO-PFD-FV4206

Pneumatic foot pedal equipped with a muffler, 4 way 2 position, pneumatic fitting 6mm, 8mm and 10mm can be selected, the internal thread is clear and standard, the sealing performance is good, no leakage, stable and reliable.

Pneumatic Foot Pedal, 5 Way 2 Position

$21.39

SKU: ATO-PFD-4F2108

5 Way 2 position pneumatic foot pedal for sale, direct acting operation, air hole one in and two out, small size, thickened spring design, durable, not easy to rust, ideal for controlling spring or load return cylinders.

Pneumatic Hand Lever Valve, 3 Way, 2 Position

$45.39

SKU: ATO-VALVE-32

Pneumatic hand lever valve, three way, two position, with 1/4, 3/8, 1/2 inch port, provide a manual return operation to allow the air to pass. This air valve can be used to control air chucks, pneumatic actuators and venturi vacuum generators.

Pneumatic Vacuum Ejector, Body Ported Type

$32.58

SKU: ATO-C-ZHD

Single stage pneumatic venturi vacuum ejector/generator at economical price, body ported type, nozzle diameter 0.5, 0.7, 1.0, 1.3mm available, max. vacuum pressure -88/-48 kPa, supply pressure 0.45 MPa.

Pneumatic Vacuum Generator

$32.86

SKU: ATO-CV-RL

Single stage pneumatic vacuum generator/ejector with low price, selectable 0.5, 1.0, 1.5, 2.0, 2.5, 3.0mm nozzle, max. vacuum pressure -91.8/57.2 kPa, supply pressure 0.5 MPa, equipped with silencer and signal confirmation equipment.

Quick Connect Air Compressor Fitting, 6mm

$15.86

SKU: ATO-AHF-PU06

Air compressor hose fitting is mainly used for air piping and quick connectors of pneumatic tools, outer diameter 6mm, 10mm, 12mm and 16mm are optional, withstand strong pressure, no trip, strong oxidation resistance, not easy to be corroded.

Refrigeration Solenoid Valve, Direct Acting, 50/60Hz

$67.62

SKU: ATO-RSV-LFFDF

Direct-acting refrigeration solenoid valve is suitable for refrigerants such as R22, R134A, R407C, R410A and clean water. It has a frequency of 50/60Hz, an internal leakage of less than 99ml/min, and can be used with multiple coil voltages of AC220V, AC110V, AC24V and DC24V to adapt to different power system requirements. It is widely used in refrigeration, air-conditioning systems and cold storage equipment.

Rigid Coupling, 16 x 16mm

$99.85

SKU: ATO-SC-GNC-1616

Rigid shaft coupling diameter 16mm, length 16mm, 4mm to 8mm, ratd torque 5 N.m, low inertia and high sensitivity, shaft coupler is made of high-strength aluminum alloy with strong corrosion resistance.

Rigid Coupling, 16 x 24mm

$99.85

SKU: ATO-SC-GNC-1624

Rigid coupling diameter 16mm, 24mm length, rated torque 5 N.m, speed of 9400rpm, moment of inertia 2.9 X 10-7 N.m, rigid clamping couplings are widely used in automation equipment, lasers (marking, engraving, welding, cutting), non-standard automation, dispensing machines, screw machines, etc.

Rigid Coupling, 20 x 20mm

$99.85

SKU: ATO-SC-GNC-2020

Diameter 20mm x length 20mm rigid coupling for sale, 5mm to 10mm, rated torque 10 N.m, speed of 7500rpm, high torque and high rigidity, the shaft couplers are widely applied to small CNC machines encoding and screw machines.

Rigid Coupling, 25 x 25mm

$109.86

SKU: ATO-SC-GNC-2525

Sell low price rigid coupling, clamp type, 25mm x 25mm, bore 6mm to 12mm, rigid couplings have the advantages of light weight, ultra-low inertia and high sensitivity, widely used in automation equipment, laser marking and dispensing machines.

Rigid Coupling, 25 x 36mm

$109.86

SKU: ATO-SC-GNC-2536

Light weight rigid coupling speed of 6000rpm, clamp type, 12Nm rated torque,diameter 25mm, length 36mm, load smoothly, reliable force transmission, easy to install and disassemble. Rigid shaft coupling has the advantages of maintenance-free, super oil and corrosion resistance.

Rigid Coupling, 32 x 32mm

$119.86

SKU: ATO-SC-GNC-3232

Rigid shaft coupling diameter 32mm, length 32mm, 8mm to 15mm bore, 4700rpm speed, 15 N.m rated torque. Small size rigid coupling has the characteristics of light weight, low inertia and high sensitivity.