Blog

Pinch valve is squeezed by pneumatic, electric, manual or hydraulic driving methods to achieve the role of switching/adjusting. A pinch valve is a valve that uses flexible tubing that can be pinched or compressed to shut off the flow of fluid or gas through the valve. When the sleeve is not clamped, the valve opens and fluid or gas can flow through it.

Different types and uses of hipot testers may be different, but generally, the following maintenance tips can be used for safe pressure measurement. Through regular maintenance and care, the performance of the hipot tester can be ensured to be stable and its service life can be extended. It also helps to reduce downtime caused by equipment failure and improve work efficiency.

A hand valve is a type of valve that is manually operated, typically by turning a handwheel or lever. It's used to control the flow of fluids (liquids or gases) in a piping system. Hand valves are commonly found in various industries, including oil and gas, chemical processing, water treatment, and HVAC (heating, ventilation, and air conditioning) systems.

SCARA robot is a robot arm specially used for assembly operations. It has three rotating joints whose axes are parallel to each other and can be positioned and oriented in a plane. In addition, there is a mobile joint to complete the movement of the end piece perpendicular to the plane. This type of robot is usually equipped with a visual recognition system, which can be programmed to identify and grasp various parts to meet different operating requirements. It has a compact structure, agile movements, and strong adaptability to the working environment. Therefore, the SCARA is particularly suitable for those occasions that require fast and precise operations, such as electronic assembly, pharmaceutical packaging, and other industrial fields.

Autotransformer refers to a transformer whose windings are primary and secondary on the same winding, with the primary and secondary windings directly connected in series and self-coupled. According to the structure, it can be further divided into adjustable pressure type and fixed type. A regular transformer transfers energy through electromagnetic coupling between the primary and secondary coils. There is no direct electrical connection between the primary and secondary coils, while an autotransformer has a direct electrical connection between the primary and secondary coils. Its low-voltage coil is a part of the high-voltage coil. ATO online store will explain how autotransformers work and their advantages in power systems and electronic devices.

A magnetic starter is a device that uses magnetic field force to start an engine. Its operation principle is based on electromagnetic induction and magnetic interaction. It typically consists of two main parts: an electromagnetic coil and a permanent magnet.

The maintenance of the foot switch is an important daily task that requires careful inspection, correct diagnosis, timely replacement of parts, and necessary cleaning and maintenance. By following the correct maintenance steps and precautions, the service life of the foot switch can be effectively extended to ensure the normal operation and safe use of the equipment.

A foot switch is a way to control the on and off of a circuit by stepping on it, thereby realizing the start, stop, reversal or other control functions of mechanical equipment or production processes. The main function is to replace the operation of both hands, especially when the hands are inconvenient or cannot reach the control circuit, and the start, stop or other operations of the equipment are controlled through foot pressure. In addition, the foot switch can also be used to control the output current. Momentary foot switch and electric foot switch are two types of control switches widely used in different application scenarios. They differ in terms of working principles, structural design, usage environment, and functional characteristics. This article will conduct a detailed comparative analysis of these types of foot switches.

In actual use, various faults may be encountered, and the handling methods of these faults are crucial to ensure the normal operation of the tester. Below ATO Industrial Automation will discuss in detail the common faults of the insulating oil dielectric strength tester and their handling methods.

In various industrial and scientific applications, the application of vacuum technology is becoming increasingly important. Vacuum generators and vacuum pumps are two common devices that play a crucial role in generating and maintaining vacuum environments. This article provides an in-depth comparison of these two devices, with a focus on their stability.

Air hoists (also known as pneumatic hoists) and electric hoists are two types of lifting equipment with different power sources.
Pneumatic hoists utilize air pressure as their power source and typically comprise pneumatic motors, wire ropes, lifting mechanisms, and operating control systems. They are characterized by their simple structure, safety, reliability, and stable operation. These hoists are suitable for special environments such as those with explosion hazards or in damp and corrosive conditions. They find wide application in handling and lifting operations in factories, warehouses, ports, and other locations.
Electric hoists, on the other hand, are powered by electric motors and usually consist of electric motors, wire ropes, lifting mechanisms, control systems, and safety protection devices. They are known for their compact size, light weight, and ease of operation. Electric hoists are extensively used in handling and lifting operations across various settings such as factories, warehouses, and docks, and they are adaptable to diverse working environments.

Air hoists, or pneumatic hoists, are ideal explosion-proof lifting equipment, mainly used in high-explosive dust environments such as petroleum, chemical, coal mines, textiles, and other situations where explosion-proof requirements are needed. As an upgraded alternative to electric hoists, air hoists operate efficiently with minimal energy consumption, requiring only compressed air at a specified pressure for operation. Air hoists are equipped with air-cut protection, which ensures that the workpiece does not descend or fall in case of sudden loss of air pressure. Additionally, these hoists can be paired with various non-standard lifting fixtures to accommodate workpieces of different shapes. They can also be used in conjunction with jib cranes or guide rails for mobility, making them essential tools for promoting safety and cost-effectiveness in industrial operations. ATO Automation Store offers air chain hoists with specifications ranging from 300 lb 10 ft to 2000 lb 20 ft, providing flexibility to meet diverse lifting needs.

The function of the alarm is to send out a sound or signal in time when an emergency occurs to remind people to take action to prevent casualties and property losses. ATO provides different models of high-quality alarms and alarm lights used with the alarms for you to choose from to protect your safety. These include TOWL, GLASS alarm lights, AVALM, MOALM, and MDSR alarms. The price range of ATO alarms and alarm lights is listed below for your reference. Please note that the table below only shows some prices, not all. For more information, please view the alarm product page.

Linear slide, also known as linear guide or slide rail, is a mechanical component used to achieve linear motion. Its basic principle is based on the reduction of rolling friction to achieve high precision, high rigidity, and high-speed linear motion. This blog will provide a detailed introduction to linear slides.

Welding station maintenance and upkeep is critical to ensuring welding quality and the long life of your equipment. It is recommended that operators be fully trained before taking up the job to ensure the correctness of the operation, help you improve welding efficiency and quality, and extend the service life of the equipment.

Hydraulic pullers are an ideal new tool to replace transmission pullers. Easy to operate, labor-saving, and not limited by the site. There are many types of hydraulic pullers, including integrated hydraulic pullers, separate hydraulic pullers, coupler-specific pullers, mobile hydraulic pullers, separate non-slip hydraulic pullers, and vehicle-mounted hydraulic pullers. Choosing the right puller depends on the task you want to complete and the environment in which you work.

Sander machine is a commonly used equipment for sharpening various cutting tools and tools, as well as for grinding, deburring, and cleaning ordinary small parts. It mainly consists of a base, grinding wheel, electric motor or other power source, bracket, protective cover, and water heater. It can be divided into handheld grinding machines, vertical grinding machines, suspended grinding machines, desktop grinding machines, etc.

Forward reverse switches, as a common electrical switching device, are widely used in various circuits due to their simple and practical characteristics. The principle is simple and clear, and by changing the position of the switch, the on/off control of the circuit can be achieved. ATO online store will explore the definition, working principle, and application fields of forward and reverse switches.

Buzzers are divided into active buzzers and passive buzzers. The "source" here does not refer to the power supply, but the oscillation source. Active buzzers have oscillation sources, while passive buzzers do not. The differences between them also include: different working principles, different appearances, different prices, different test sounds and multimeter resistance measurements, different requirements for input signals, different DC voltage tests, and different applicable scenarios. Next, ATO Automation Store will explain in detail for you.

Motor alarm is a type of sound and light alarm, also known as vibration alarm, which is a sound signal generator, mainly used for alarm, prompt and other occasions. It uses the built-in motor to remind the user that there is an abnormal situation in the device or room. It is usually composed of components such as batteries, circuit boards, vibration motors, etc.