Sensors

Factory price magnetic proximity sensor, M12 thread, is a hall effect sensor with NPN NO/NC or PNP NO/NC signal output, flush installation type, 12mm detection distance, yellow LED indicator. This hall magnetic switch provides long sensing ranges that can reliably detect magnetic objects. With an IP67 protection degree, the sensor is suitable for use in demanding industrial environments.

High precision laser distance sensor with load current 200mA, measuring center distance 30mm, response time 2ms/ 16ms/ 40ms can be configurable, laser spot size Φ0.5@30mm, two output signals are optional. It has advantages of light weight, long service life.

Buy a stainless steel float switch for water tank online. High temperature resistant cable float switch operates at 4A rated current, 220V rated voltage, and 0~100℃ temperature, used in pools in homes, factories and mines, weak acid and weak alkali pools, barrels, tanks, etc.

Affordable price inclinometer sensor for sale. single axis and dual axis, measuring range ±10°/±30°/±60°/±90° for selection, output signal CANopen, absolute accuracy 0.05° and rated voltage DC 9-36V. Buy a high precision industrial tilt sensor for harsh industrial control applications.

Incremental optical linear encoders are available for sale at factory prices, offering optional resolutions of 0.1 µm, 0.5 µm or 1 µm to meet various accuracy requirements. The non-contact incremental linear encoder operates at a frequency of 4 MHz and has direct outlet, DB9 or DB15 output options, suitable for precise position measurement in industrial applications and precision machinery.

Dust sensor module integrates infrared detection technology and uses the particle counting principle to detect PM2.5 in the environment. It can also be used as a VOC gas sensor with good stability, UART/PWM output, easy installation and use, and high sensitivity.

High precision laser sensor has 304 stainless steel detection head and plastic protective sleeve, thread size M6*0.5mm, fast response time 0.1ms, laser spot size 1.2mm, can be used for speed, depth, length, displacement, position measurement. The diffuse reflection M6 laser sensor has 150mm detection range, while the through beam laser sensor has the linear detection range of 50m.

Signal isolators ATO-SIGNI-602S series are the upgraded loop-powered signal isolators with smaller installation space and better anti-interfere ability (IEC 61326-3-1). Loop-powered signal isolator has a high accuracy of 0.1%FS and 35mm DIN rail installation structure. Now it is widely used for signal isolation/conversion/distribution of electrical cabinet, VFD, PLC control cabinet and pump station.

Magnetic hall angle sensor is a non-contact position sensor, selectable full range precision ±0.3° or±0.1°. CAN-Bus output signal, voltage input 7 – 36V DC, with multi-stage different sloping setting programmable intelligent control to realize the measuring range of 0 ~ 360°.

The cylinder electric type magnetic sensor has the characteristics of miniaturization, intelligence, digitization, multi-function and systematized. It has a variety of different styles and is suitable for various cylinders. The maximum contact capacity is 2.8 W. The 3-wire-NPN cylinder sensor is easy to install. The switch response time is fast. This magnetic cylinder sensor must be your best choices.

This magnetic rotary angle sensor is a high-performance non-contact sensor designed for precise and durable angle measurement. Utilizing Hall effect technology, it offers infinite rotation, high isolation voltage, and excellent linearity. With a compact aluminum alloy housing, wide operating voltage (3.3–5V DC), it is ideal for harsh industrial environments including exposure to water, oil, and vibration.

Lower cost NDIR CO2 sensor for sale online. The carbon dioxide sensor with wide range measuring range from 0 to 5000 ppm, working voltage 5VDC, UART/ PWM two output signal can be chosen. Infrared carbon dioxide sensors are widely used in various occasions where flammable and explosive gases exist.

With a compact design measuring 110mm in length and 20mm in diameter, featuring versatile output options of 0-5V, and 4-20mA, covering frequencies from 31.5Hz to 8kHz, noise sensor captures a broad spectrum of sound.

Safety light curtain with photoelectric protection for sale. Power supply AC110-220V, maximum output current reach 100mA. Light axis pitch is 10mm, 20mm, and 40mm, and detection precision is 15mm, 25mm, and 45mm. With sealing level IP65, the safety light curtain works at -10°C ~ 55°C. Quick response time<10ms, and working current<200mA. Usually used in punching machines, shearing machines, bending machines, and other large mechanical equipment to protect safety. Easy to install and operate.

PTFE pH electrode for strong acid and alkali, PTFE shell, good corrosion resistance, 0-60℃ (32-140℉) temperature range, direct lead, 6 months service life.

Pull rope switches have two-way pull rings, action angle 30°, optional contactors 1NO+1NC or 2NO+2NC, contact capacity 6A/380VAC, 5A/380V, or 10A/500V, return mode automatically/manually. Safety pull rope switch is specially used to send alarm signal and stopping signal for belt conveyor when there's an emergency. Cable pull switch also has optional shell of cast aluminum type, explosion-proof type, stainless steel type or square type, protection class IP65/NEMA4 and working life over 1 million times.

Cheap pyranometer with 300-3000nm spectral range for sale online. Pyranometer sensor surface is coated by black coating with high absorption rate. Aluminum alloy instrument case can protect pyranometer safety. Precision spectral pyranometer widely applys in agriculture and forestry monitoring, tourism eco and weather stations.

Reaction torque sensor is a special static torque sensor for torque wrench calibration. Torque sensor has one end of flange and the other end of square groove. Reaction torque transducers have a capacity range from 5 Nm/10 Nm/20 Nm/50 Nm/100 Nm to 200 Nm, 120%FS safety overload, and can measure both forward and reverse torque.

Low price S beam load cell with bidirectional force for sale. S type load cell has different measuring ranges 50kg-5 ton, and different output signals analog, digital, RS485 output. The beam load cell offers 2mV/V sutput sensitivity, 5-15V operating voltage, suitable for hopper scale material weighing pendant, spring tension test bench, pressure monitoring test bench.

High-quality S-type load cells for sale are used for tension and compression and are available in a variety of capacities from 200kg to 5 tons. Constructed of durable stainless steel with a sensitivity range of 2.0 to 3.0 ±10% mV/V and a response frequency of 1k Hz, it provides accurate measurements even in harsh conditions, making it a reliable and cost-effective choice for tension and compression measurements in industrial environments.