Transmission & Actuator

Low cost 1/2 inch ball valve with aluminum alloy electric actuator for delivering water, air, gas, oil, liquid and other media, DN15 (15mm) port size, PTFE seat material, 50/ 60Hz 110V AC, 220V AC, 380V AC, and 24V DC power supply. Small in size and light in weight, can be convenient for pipeline installation.

2 way PVC diaphragm valve with 1/2 inch (DN15) flanged port for flow and liquid control, available in UPVC and CPVC body material, PTFE diaphragm. This manual diaphragm valve is often found in water treatment, chemical processing and pharmaceuticals.

Reasonable price and high quality 1/2 inch globe valve for sale online. Precise connection of valve body, adopts with forged steel. The medium of 1/2 (DN15) globe valve is steam. Forged steel globe valve widely used in oil industry, chemical industry and metallurgical industry.

Factory price 1/2" gas solenoid valve for sale online, can be used for liquefied petroleum gas (LPG), natural gas and other gases, suitable for DC 9-15V power supply. The main body is made of high-quality brass or aluminum alloy, corrosion-resistant and high-temperature resistant.

1/2" hydraulic flow control valve is a throttle valve that uses high-precision pilot mode to control the flow. One way flow control valve, thread connection, suitable for the pipeline that needs to control the flow and pressure of the oil distribution pipe.

1/2" inch (DN15) flanged inverted bucket steam traps operate on a simple yet highly effective principle. Their unique inverted bucket design relies on the inherent difference in density between steam and condensate. When condensate accumulates within the trap, the inverted bucket sinks, causing the valve to open. This allows the condensate to be efficiently discharged, preventing it from mixing with valuable steam. Conversely, when steam enters the trap, the inverted bucket rises, closing the valve and preventing the loss of steam.

Reliable 1/2" plunger valves with a nominal pressure of 1.6 MPa, it is available for steam, water and oil media. Plunger valves are typically used in applications where tight shut-off is required, such as water treatment plants, industrial processes and irrigation systems.

lightweight and low price pneumatic angle seat valve comes with single acting stainless steel or plastic actuator to control air, water, oil, gas and steam. 1/2 inch (DN15) thread port, air pressure air pressure 0.4~0.8MPa, stainless steel body and PTFE sealing, 2 way 2 position for air and liquid control.

1/2"Pneumatic angle seat valve, 3 way with a maximum capacity of 1.6MPa. With precise control capabilities, the valve operates within a control pressure range of 0.3-0.8MPa, utilizing neutral gas or air as the control medium. Crafted with a durable CF8M body and featuring an actuator made from high-quality materials.

Affordable price 1/2 inch full port ball valve with an actuator for delivering water, gas, gasoline and other fluids. This pneumatic actuated ball valve powered by compressed air, with DN15 port size, stainless steel and PVC material, available threaded type, flanged type and true union type, perfect for air and fluid control.

1/2" (DN15) inch diaphragm valve for sale online. Low price sanitary diaphragm valve is available with a pneumatic actuator, welded connection, and double diaphragm, typically used in the pharmaceutical, food and beverage and biotech industries.

Favorable price pneumatic pulse solenoid valve for dust collector, with G1/2 inch thread port, available in voltage of AC110V, AC220V, DC24V, coil power 20VA. This right angle air pulse valve is specifically designed for use in pulse jet dust collector and other dust filtration systems.

Good price spring loaded pressure relief valve with a 1/2" inlet and outlet ports. The housing is made of 304 stainless steel. 1/2 inch pressure relief valve can adjust and set the pressure at the outlet end of the pressure-reducing valve according to the need.

Favorable price stainless flanged gate valve for sale online, 1/2 inch (DN15) flanged port. This DN15 ss gate valve is a crucial component in fluid control systems, commonly used in water lines, water pumps, and water tanks.

Precision air pressure regulator port size 1/4 inch, pressure 0.005~0.2/ 0.01~0.4/ 0.01~0.8 Mpa, easy to install, either freestanding with brackets or directly with the current cross block filter combination elements AF and AFM.

90 Degree elbow air hose fitting thread size 1/4 inch, outer diameter 4mm, 6mm, 8mm, 12mm are available, corrosion resistance and high pressure resistance, used to connect air pipes, air compressors, air drills, impact wrenches, air screwdrivers and other pneumatic tools.

1/4" hydraulic flow control valve for sale online. Low-price throttle valve with a thread connection, can regulate the flow of fluid in a hydraulic system, widely used in hydraulic systems to control the speed and flow of fluid.

ATO hydraulic high pressure ball valve is a type of valve specifically designed for controlling the flow of fluids, with 2 way G1/4 inch (DN6) thread port, typically in high-pressure hydraulic systems. It is used to start, stop, or regulate the flow of hydraulic fluid in a pipeline or system.

High-pressure brass needle valve with 1/4 inch thread, the 2-way needle valve with a max pressure is 1000 psi and the working temperature from -20 to 200°C. The brass needle valve is rugged enough for the oil & gas market, and suitable for most industrial applications.

Good price and high quality 1/4 inch stainless steel globe valve for sale online. Simple and compact appearance of stainless valve. Stainless globe valve with corrosion resistance and high temperature resistance. Working temperature of this type globe valve between -20 ℃ and 260 ℃. Globe valve widely used in machinery, metallurgy, and petrochemical industry.